User`s guide

Installing the CDA 7 5630 with Microcode Release 5265
77 A7 48UU Rev03 F-21
2. Select Impl.bin and, after the Warning screen, press the space bar, then select
Standard. The PC reads the IMPL.BIN file from disk.
− If you choose System, the configuration is read from the installed
hardware.
− If it is the first installation of your CDA 7, the procedure terminates by a
request to format the subsystem disks.
The current configuration is displayed:
Figure F-14. Current Configuration
3. Press Enter to accept the default choice, Change.
Complete the following screens as necessary.