User`s guide

77 A7 48UU Rev03 F-1
F. Installing the CDA 7 5630 with
Microcode Release 5265
This Appendix concerns the CDA 7 with Microcode Release 5265. This release of
the Microcode can run on systems with 18 GB or with 36 GB disks.
The following table shows the relationship Microcode Release <-> Disk Size.
Disks Release 5265
18 GB Yes
36 GB* Yes
* : Open system only
F.1 Before Installation
Before installing the CDA 7:
1. Disconnect the AC power supply cable from your machine before doing any
work (except for specific hot replacements of elements).
2. Do not switch the system on if the ground conductor is disconnected.
3. Take anti-static precautions (bracelets, anti-static packaging) when working
on electronic parts.
4. Unless specifically mentioned in the documentation, do not connect or
disconnect elements (for example cards), when live.
5. Allow the temperature to stabilize before unpacking the cabinet.