User`s guide

CDA 7 Maintenance Manual
E-22 77 A7 48UU Rev03
SA-16: (4 Channels)
Channel: A
1st dev | last dev | 1st chn | last dev | count |
======== | ======== | ======== | ======== | ======== |
000 | 07 | 20 | 27 | 8 |
Channel: B
1st dev | last dev | 1st chn | last dev | count |
======== | ======== | ======== | ======== | ======== |
Channel: C
1st dev | last dev | 1st chn | last dev | count |
======== | ======== | ======== | ======== | ======== |
Channel: D
1st dev | last dev | 1st chn | last dev | count |
======== | ======== | ======== | ======== | ======== |
================== System IDs ==================
00 | 01 | 02 | 03 | 04 | 05 | 06 | 07 | 08 | 09 | 0A | 0B | 0C | 0D | 0E | 0F |
==================================================================
E0 | E0 | E0 | E0 | E0 | E0 | E0 | E0 |
❑
This shows a configuration with 16 Mirrored disks, and 4 SCSI Channel
DIRECTORS. Check that the disks are in the right place.
E.3.7.4 Modifying the Configuration
If the configuration is incorrect, you can ask the Bull Competence Center:
• To download a new configuration file.
• If present on site, to load the configuration file from a standard configuration
diskette.
If necessary, copy the file under MS-DOS using the following procedure:
1. Press Escape to exit from the main menu. The C:\SYMM4 prompt is
displayed.
2. Rename the IMPL.Bin file as IMPL.Old.
3. Copy the IMPL.Bin file.
4. Return to the main menu:
C:\SYMM4 > LOOP