User`s guide

Installing the CDA 7 5330 with Microcode Release 5263
77 A7 48UU Rev03 C-35
EXAMPLE 2 DISK CONFIGURATION ON LAP-TOP:
**Lap top configuration for cda #01
---> Name of the b
in file is: Cxxxx-xx
MS
DEV
01 02 03 04
00 01 02 03
SA-15A
B
C
D
S
A-16A
B
C
D
20 21 22 23
20 21 22 23
i.e. corresponds to file
Dxxxx-xx.BIN on the hard disk
External identifier MSxx
Device number for CDA sub-syste
m
i.e. SCSI Adaptor corresponding
to SCSI DIRECTOR #16, port A
The file name Dxxxx-xx.BIN must correspond to one of the typical configurations.
The active file IMPL.BIN in the PC must be identical.
❑
CAUTION:
The information that you note is the only unambiguous record of the
correspondence between external identifiers of logical disk units (MS), seen
from GCOS, and physical disk drives (DEV) seen from the CDA 7 cabinet Lap-
Top.
You must keep a copy of this document and send another copy to the Bull
Competence Center.