User`s guide

Installing the CDA 7 5330 with Microcode Release 5263
77 A7 48UU Rev03 C-23
The next screen gives a warning concerning a format operation on disks. The
following dialog box asks if the PC is connected to a CDA 7 cabinet ("box"),
which is usually the case.
CURRENT CONFIGURATION:
DA Code: REVISION: CC73DA01; CHECKSUM: 01EF2E96: DATE: 01/27/1995
MTPF number: 000059C1; MTPF date: 07/06/1995;
SA Code: REVISION: FB73AA01; CHECKSUM: 018DCCBC: DATE: 01/27/1995
MTPF number: 000059C7; MTPF date: 07/06/1995;
RS232 baud: 33400 8 bits; Cache Fast Write Ceiling: 80%;
Cache Fast Write Track Ceiling: 32000 Number of volumes: 8
Emulation: FBA:Mix; Time to shut off Battery: 120 Seconds; Mirroring: YES;
Prefetch: Yes; Dynamic Spare: NO; Microprocessor I/O cache: YES/YES;
Server/Bull: Online Tests;
<L>oad, <S>ave, <B>oth, <C>hange, <D>isplay, <A>dvanced, <Q>uit?
First installation only
The box is in fact the CDA cabinet
Are you connected to be actual box? Y
Current procedure
Upgrade/modification operations
"Disk "
SYMMETRIX Configuration Program
Revision 1.12 Date: June 26, 1995
User level:
Configuration source:
"Standard" Advanced Expert
System Production Default
C
Figure C-15. Installation Dialog
The final screen contains several options (see the line at the bottom of the screen):
L Load and activate the (new) configuration
S Save the configuration on disk after modification
without loading it
B Save and Load at the same time after modification
C Change (or adapt) what is displayed
D Display the IMPL.BIN file as described above in the
previous section
A Advanced functions reserved for specialists or
engineering
Q Exit without changing and return to the main menu
Now that the IMPL.BIN file is correct , you can go on and select the "LOAD"
command.