Specifications

11
Using Your Hob
To switch the hob on
To switch the power on, touch and hold the key for approximately
two seconds. The hob will beep and all ve zone displays will show
zero.
Please note: If a power level is not set within ten seconds, the hob
will switch o automatically.
To set the power level
There are power level keys for each individual zone which allow you
to set the power level by touching the “+” or “-” keys for the zone
required.
To turn a zone on, either touch the “+” key to set the power level at
an initial setting of “4”, or touch the “-” key to set the power level at an
initial setting of “9”.
To increase the power level from 1 (minimum) toward 9 (maximum),
touch the “+” key. To decrease the power level touch the “-” key.
To turn the power o
To switch o a single zone, touch the “+” and “-” keys together for
the zone no longer required. This will set the power level to zero.
Alternatively, touch the “-” key until the zone display shows zero.
When all the zones are at zero, the hob will switch o automatically
after approximately ten seconds.
Alternatively, to switch o the hob immediately, touch and hold the
key for approximately two seconds.