Operating instructions
EVG CIMFramework - Core
28 Copyright © 2013 EVG
2.4.2.1 Interlocked Modules
The following area displays the current status of interlocked modules.
The following states can be displayed in this overview.
All doors are closed and locked.
Module is not ready yet (disallows opening doors).
Module is ready (allows opening doors).
Refer to chapter 5 Safety Doors for information about how to operate
the safety doors.
2.4.3 Tooling Profiles
Open the tab Tooling Profiles to switch between available tooling
profiles.
Select a tooling profile from the list and click Switch To Profile to
switch to it (only possible in maintenance mode).
Figure 31 - Tooling Profiles
Tooling profiles can be set up in the tab Tooling Profiles in Setup
(available depending on permission).
79 of 370