Operating instructions

GUI
Copyright © 2013 EVG 21
2
2
2.2 Modules
Click Modules in the bottom navigation bar:
The Modules window contains a detailed overview of all modules in the
system.
2.2.1 Example: Robot Handling System
The following example shows the basic purpose of the module
windows. The module window of Robot Handling System can be used
to operate the robot (e.g. switch between “Normal Mode”, “Safe Mode”
and “Train Mode” or to open the “GencoBot ToolBox”).
Figure 23 - Modules: Robot Handling System
Note: Available module windows vary depending on system configuration (e.g.
“Robot Handling System” is only available on fully automated systems).
72 of 370