Operating instructions

Start Up

1.3.4 Maintenance Mode

 Module is not available for executing or cleanup.

 Maintenance mode is entered and left by selecting the command

from the high-level menu (see below).

 It can be entered prior and after module initialization.

 It offers a maximized set of high-level commands for maintenance.

Figure 12 - Maintenance Mode

Click a module in Maintenance Mode to find further high-level

commands (e.g. for maintenance).

The following example illustrates how an additional function is available

in Maintenance Mode (Test & Train). This function is only available in

Maintenance Mode.

Figure 13 - Maintenance Mode Menu Example

62 of 370