Operating instructions

EVG CIMFramework - Core
10 Copyright © 2013 EVG
Right-click a module and select Enable to switch from disabled to
enabled state (or Disable to switch from enabled to disabled state).
Figure 9 - Enable Module
1.3.3 Ready State
 Module is ready for executing or cleanup.
 Ready state is entered after successful module initialization.
 Minimized set of high-level commands for operation.
Figure 10 - Ready State
Right-click a module in “Ready” state to find a limited set of high-level
commands for operation.
Figure 11 - Ready State Menu
61 of 370