Operating instructions

Weekly Maintenance
Copyright © 2012 EVG 65
4
4
4.6.1.3 CAN System
To activate wafer bow pin press high level command “Wafer Bow Pin”.
To deactivate wafer bow pin press high level command “Piston Up”.
4.6.1.4 Adjustment Calibration Schematic
1) Try until you can pull the strip out slightly (until the bow-pin looses
contact to the paper strip  Wafer bow – zero contact.
It may be necessary to rotate the adjustment ring for- and backwards until you
have found the exact zero-contact position.
2) Rotate the adjustment ring 500µ down (turn right).
272 of 370