Operating instructions

Bond Module
52 Copyright © 2013 EVG
5.2 Heater
5.2.1 Set Temperature
Set the temperature of a selected heater to apply heating.
1) Choose “Top”, “Bottom” or “Both” heaters.
2) Enter the setpoint in °C.
3) Click on to confirm.
5.2.1.1 Cooling
Set the temperature of a selected heater to apply cooling.
1) Select if cooling should be done on “Top”, “Bottom” or “Both”.
2) Select if the cooling should be switched “ON” or “OFF”.
3) Click on to confirm.
184 of 370