Operating instructions

Recipe Programming
Copyright © 2013 EVG 33
4
4
4.3.1.3 Preheat
The preheat command is used to set the pre conditioned temperature
and tolerance range. The temperature of a heater which is exceeding
the preheating temperature can be reduced if the cooling function is
activated.
Note: “Preheat” command has to be used as first recipe step.
Figure 26 - Preheat
Value
Description
Preheat Temperature Top
Enter the top heater target temperature.
Tolerance Top
Enter the top heater temperature tolerance.
Preheat Temperature Bottom
Enter the bottom heater target temperature.
Tolerance Bottom
Enter the bottom heater temperature tolerance.
Allow Active Cooling
Active cooling can be activated. Only in case of the
specified target temperature is lower than the actual
temperature.
165 of 370