Operating instructions

I/O

8 I/O

Depending on the module, the I/O displays a list of I/O information and

controls (e.g. digital input, digital output, analog input, axis and gauge).

1) Go to System > I/O to open the I/O window.

2) Select one or more modules from the list on the right to display its

I/O information and controls.

Notice:

If not handled with care, changing settings in I/O can cause severe damage to

the system. There are no software security blocks that guard the system.

Only authorized personnel may use the I/O. If damage is caused by

unauthorized personnel the warranty will be lost.

8.1 I/O Axis Field

The Low I/O Axis Field displays position and state of axes.

All mapped axes are shown in Low I/O and all axes of a module are

shown in Module I/O.

128 of 370