Operating instructions

Recipe Programming
Copyright © 2013 EVG 63
4
4
4.9 Recipe Validation
4.9.1 Static Recipe Validation
A recipe can be validated for issues on opening and saving.
It has to be validated when adding a job (a job cannot be started if there
is an issue with the recipe).
The last known validation result is shown in the details section of the
common task view.
The recipe can also be validated by clicking the Validate button in the
recipe controls at any time.
A list of information, warnings or errors (if any) will be listed at the
bottom of the recipe window.
Example:
Figure 64 - Recipe Validation Error
The recipe command where issues were detected will be marked with
the corresponding icon in the recipe flow diagram.
Example:
Figure 65 - Error Icon
4.9.2 Dynamic Recipe Validation
In addition to the static recipe validation, the dynamic recipe validation
checks the recipe for additional issues when a job is started.
If there is an error, the job is canceled.
If there is a warning, the user has to decide if the job should be
canceled.
114 of 370