Specifications

7
position to prevent damage from other items in the dishwasher. After
rinsing and drying, replace the filters.
To remove the grease filters, pull open the handle on the grease
filter. It will release at the handle side. Then lower the grease filter to
remove it completely. To replace the grease filter, repeat the steps in
reverse.
Please note:
Cleaning the grease filters in the dishwasher may lead to
discolouration. This is normal and does not constitute a fault with the
appliance.
Changing the charcoal filter (re-circulating only)
To ensure best performance of your extractor, you should replace the
charcoal filters every four to six months, depending on use.
To attach a new charcoal filter, first remove the grease filters as
described above. Then oer up the charcoal filter to the side of the
motor as shown in figure 2 and turn it clockwise until it locks into
place. Repeat with the other charcoal filter on the other side of the
motor. Then replace the grease filters and cover panels.