Specifications

11
Installation
Note
• We recommend that you seek the
help of another individual when
installing this product.
• The fixings supplied are suitable for
most installations. It is the
responsibility of the installer to ensure
that the fixings are suitable for the
ceiling type in the property.
Installation
1. Firstly, fix the vent outlet to the
extractor body using four screws, as
shown in fig 5.
2. Using the supplied template, mark
the positions of the ceiling mounting
screws and the cut-out for the
ducting pipe, if required.
Fix four suitable wall plugs into the
holes and proceed to assemble the
extractor, as described in fig 6.
3. To determine the overall height of
the chimney section, use the
Fig. 5
Fig. 6
1
2
3
4
Fig. 7
1 – lower front strut
2 – lower mounting frame
3 – Upper front strut
4 – top mounting frame