Specifications

9
INSTALLATION
Fig. 6 Fig. 7
Figu re 2 - M ar k wal l as required (see ta ble 1)
Fig. 8 Fig. 9
Figu re 3 - Drill h oles
Fig. 10 Fig. 11
Figu re 5 - Se cure hoo d (tigh ten all screws)
Figu re 6 - Fit ductin g adap tor
Tools required Mark wall as required (see table 2)
Drill holes Fit wall xings and top screws - Ensure that any xings you use
are appropriate for the wall type.
Secure hood (tighten all screws) Fit ducting adaptor
IMPORTANT SAFETY WARNING: ONLY USE THE SCREWS PROVIDED WITH THE EXTRACTOR TO MOUNT THE DUCTING
ADAPTOR. THE USE OF LONGER SCREWS MAY CAUSE DAMAGE TO THE INTERNAL WIRING WHICH WILL NOT BE COVERED BY
THE GUARANTEE.