Specifications

8
Mounting your Extractor
When the extractor is to be installed above an electric hob, the minimum
distance between the hob and extractor must exceed 600mm (650mm is
recommended).
When the extractor is to be installed above a gas hob, the minimum
distance between the hob and extractor must exceed 700mm (750mm is
recommended).
If the instructions provided with your gas hob state that the required distance
between the hob and extractor must be greater than 700mm, then that is
the distance that should be observed; this is a legal requirement and may
lead to your hob being disconnected from the gas supply and the installation
being reported to RIDDOR (The height should be measured from the top of
the burners).
IN THE ABSENCE OF ANY INSTRUCTIONS SUPPLIED WITH THE
GAS HOB, THE MINIMUM DISTANCE BETWEEN THE HOB AND
EXTRACTOR MUST BE AT LEAST 760mm.
The width of any hob must not be greater than the width of the extractor
installed above it.
Fig. 5
Fig. 4
ECH61/
ECH71
ECH91/
ECH101
A
55 55
B
210 210
C
400 400
D
203 303
E
75 75
F
65 65
Table 2
Gas: 750mm recommended.
Electric: 650mm recommended.