Specifications

7
Electrical Information
Mains electrical voltage: 230 – 240Vac
Total rated power consumption: 240W
Troubleshooting
Please note:
Your extractor is equipped with a motor protection device that will switch o the motor to prevent damage from overheating.
This may happen during cooking when most or all of the zones/burners are being used simultaneously, or if your extractor is
installed incorrectly, lower than the recommended height.
This is normal, and the extractor will work again once the motor has cooled suciently.
If your extractor is not working:
1. Check that the mains supply has not been switched o.
2. Check that the fuse in the spur has not blown.
Contact CDA Customer Care
A : Customer Care Department, The CDA Group Ltd, Harby Road, Langar, Nottinghamshire, NG13 9HY
T : 01949 862 012 F : 01949 862 003 E : [e-mail] W : www.cda.eu