Specifications

5
Changing the Light
DO NOT CHANGE THE LIGHT BULB IMMEDIATELY AFTER USE AS THE BULB WILL BE HOT. ALLOW IT TO COOL
BEFORE REMOVING IT.
Remove the grease lter, unscrew the light bulb and replace the light with the required light bulb as shown below. Finally, replace
the grease lter.
Do not touch bulbs or adjacent areas during or straight after prolonged use of the lights.
The light is designed for use during cooking and not for general room illumination. Extended use of the light can reduce the life
span of the bulb.
Bulb replacement is not covered by the guarantee.
Only use bulbs recommended for your extractor. Do not t bulbs of a higher power rating. Bulbs of a lower power rating may be
adequate for use, generally last longer and use less energy.
Spare bulbs are available from CDA Customer Care or from your local DIY shop.
ECH
50W max halogen 2 pin GU10
Table 1