manual

Mounting your Extractor
When the extractor is to be installed above an electric hob,
the minimum distance between the hob and extractor must
exceed 600mm (650mm is recommended).
When the extractor is to be installed above a gas hob, the
minimum distance between the hob and extractor must
exceed 700mm (750mm is recommended).
If the instructions provided with your gas hob state that the
required distance between the hob and extractor must be
greater than 700mm, then that is the distance that should be
observed; this is a legal requirement and may lead to your hob
being disconnected from the gas supply and the installation
being reported to RIDDOR (The height should be measured
from the top of the burners).
IN THE ABSENCE OF ANY INSTRUCTIONS SUPPLIED
WITH THE GAS HOB, THE MINIMUM DISTANCE
BETWEEN THE HOB AND EXTRACTOR MUST BE AT
LEAST 760mm.
The width of any hob must not be greater than the width of
the extractor installed above it.
Fig. 5
Fig. 4
ECH61/
ECH71
ECH91/
ECH101
CPX ECN
A
55 55 54
52
B
210 210 254
207
C
400 400 233
290
D
203 303 95 90
E
75 75 125 125
F
65 65 117.5 120
Table 2
Gas: 750mm recommended.
Electric: 650mm recommended.