Specifications
17
Replacing the Halogen Oven Lights
WARNING: Ensure the appliance is switched o before replacing the
lamp to avoid the possibility of electric shock.
• Let the oven cavity and the heating elements to cool down.
• Switch o the electrical supply.
Top Right Lamp:
• Remove the protective cover C (g. 5);
• Replace the halogen lamp B with a new one suitable for high
temperatures having the following specications: 230V and same
power (check watt power as stamped in the lamp itself) of the
replaced lamp.
IMPORTANT WARNING: Never replace the bulb with bare hands;
contamination from your ngers can cause premature failure.
Always use a clean cloth or gloves.
• Ret the protective cover;
Left Lamp:
• Remove the left wire rack by unscrewing the xing screws.
Press down from the top the protective cover A (g. 5) and remove it
by rotating on the lower side. IMPORTANT: never use screwdrivers
or other utensils to remove the cover A. This could damage the
enamel of the oven or the lampholder. Operate only by hands.
• Replace the halogen lamp B with a new one suitable for high
temperatures having the following specications: 230V and same
power (check watt power as stamped in the lamp itself) of the
replaced lamp.
IMPORTANT WARNING: Never replace the bulb with bare hands;
contamination from your ngers can cause premature failure.
Always use a clean cloth or gloves.
• Ret the protective cover A operating in reverse order.
ATTENTION: the notch in the inner edge of the cover must be
oriented toward the lamp.
• Assemble the left wire rack.
Note: Oven bulb replacement is not covered by your guarantee.
A
B
B
C
1
2
A
A
WRONG
CORRECT
Fig. 5