Technical data

47
1/2” BSP
(male)
Left gas
inlet pipe
Right gas
inlet pipe
Gas Connection
GB
Cat: II 2H3+
The gas supply must use the nearest gas inlet pipe which is located at the left or
the right hand side at the rear of the appliance (figs. 40a - 40b).
The hose should also be connected in such a way that it does not touch the floor.
To screw the connecting tube operate with two spanners (fig. 39).
The unused end inlet pipe must be closed with the plug interposing the gasket.
After connecting to the mains, check that the coupling are correctly
sealed, using soapy solution, but never a flame.
Plug
1/2” BSP
(male)
Left gas
inlet pipe
Right gas
inlet pipe
Plug
Fig. 40b
Fig. 40a
Fig. 39
mod. RV 1002 ..
mod. RV 902 ..