Specifications

39
D
G
Fig. 7.25
Fig. 7.22
Fig. 7.21
E
F
Fig. 7.24
H
Fig. 7.23
REASSEMBLING THE INNER GLASS
To reassemble the inner glass of the
oven doors operate as follows:
– Check the correct positioning of the
no. 4 (four) silicon rubbers D (fig. 7.21).
- Insert the inner glass in the left E and
right F side guides (fig. 7.22) and
gently let it slide up to the retainers H
(fig. 7.23).
- Top oven door only: Reassemble the
seal G in the correct way (fig. 7.24) by
hooking the no. 3 (three) fixing hooks
in the proper holes (fig. 7.25).
- Open completely the oven door and
close the lever A on the left and right
hinges (fig. 7.26).
A
Fig. 7.26
It is normal the opened gap between the
top edge of the inner glass and the sealed
gasket. This allows the cooling air
circulation.
The bottom
oven door has
not a sealed
gasket in the
top part.
The top oven
door has a
sealed gasket
in the top part.