Specifications

35
REPLACING THE OVEN LAMP
WARNING: Ensure the appliance is switched off before replacing the
lamp to avoid the possibility of electric shock.
• Let the oven cavity and the heating elements to cool down;
• Switch off the electrical supply;
TOP RIGHT LAMP:
• Remove the protective cover C (fig. 7.13);
• Unscrew and replace the bulb B with a new one suitable for high temperatures (300°C)
having the following specifications: 230-240V 50 Hz, 15W, E14;
• Refit the protective cover;
LEFT LAMP (BOTTOM CAVITY OF SOME MODELS ONLY):
• Remove the left wire rack (and the side catalytic panel for the models with side cat-
alytic panels) by unscrewing the fixing screws.
• Press down from the top the protective cover A (fig. 7.13) and remove it by rotating
on the lower side. IMPORTANT: never use screwdrivers or other utensils to remove
the cover A. This could damage the enamel of the oven or the lampholder.
Operate only by hands.
• Unscrew and replace the bulb B with a new one suitable for high temperatures (300°C)
having the following specifications: 230-240V 50 Hz, 25W, E14.
• Refit the protective cover A operating in reverse order. ATTENTION: the notch in the
inner edge of the cover must be oriented toward the lamp.
• Assemble the left wire rack (and the side catalytic panel with the arrow up for the
models with side catalytic panels).
Note: Oven bulb replacement is not covered by your guarantee.
A
B
B
C
1
2
A
A
Fig. 7.13