Technical information

8
To run a programme
• Sort out the clothes into groups of similar fabrics and colours.
Check the care label inside the garment. We suggest that a fabric
conditioner be used to reduce static electricity. Delicate articles e.g.
tights should be placed inside a pillowcase. It is better to dry small
and large articles together.
• Open the door.
• Load clothes loosely into the drum.
• Load sheets first starting with one corner.
• Close the door.
• Dry your hands.
• Switch on the machine.
• Select correct heat position.
• Set the programme to the required dryness setting.
• Press the start button.
• The drum will begin to turn, and will stop when the clothes are
dry. The drum will rotate clockwise and anticlockwise during the
programme alternately to reduce creasing.
• There is an automatic 12 minute cool down period at the end of the
cycle, during which the heater is switched o, to minimise creasing
and prevent damage to the clothing.
• After each programme, the dryer will run an anti-crease programme,
rotating the drum briefly every six minutes until the dryer is stopped
or the door is opened.
• Once the clothes are removed, clean the filter.
• Switch o the electricity supply.