Technical information

9
Delay start
The dryer is equipped with a variable delay start timer of up to 9 hours
duration at hourly intervals.
To set the delay timer, first select the programme, heat setting and
required duration (if applicable) and then press the “Delay Timer”
button. This will switch the timer on for one hour, which will show on
the “Delay Start” display. To change the delay duration, press the
“Delay Timer” button again until the required delay duration is shown
on the display. Then press the programme “Start” button to start the
countdown.
To cancel the “Delay Timer” before the countdown has started, press
the “Reset” button.
To cancel “Delay Start” once the countdown has started, open the
dryer door.