Technical information

10
To Run a Programme
For energy labelling purposes (EN61121:2005) for a cotton dry load,
use the maximum load weight for cotton and set the timer to the
recommended drying time for cotton dry as specified on the control
panel.
The standard cotton programme is suitable to dry normal wet cotton
laundry. It is the most ecient programme in terms of energy
consumption for drying wet cotton laundry.
Your appliance is a reversing large door opening condenser dryer;
as such, a full load will typically take 126 minutes and will use
approximately 4.67kWh of electricity. A half load will typically take 77
minutes and will use approximately 2.64kWh of electricity.
The power consumption of the o-mode and the left-on mode is zero.
• Sort the clothes into groups of similar fabrics and colours. Check
the care label inside the garment. We suggest that a fabric
conditioner be used to reduce static electricity. Delicate articles e.g.
tights should be placed inside a pillowcase, or similar. It is better to
dry small and large articles together.
• Open the door.
• Load clothes loosely into the drum. Load sheets first, starting with
one corner.
• Close the door.
• Dry your hands.