Technical information

APPENDIX A
3/31/2008 Rev. 4.3 A-5
To operate the CI-510CS, turn the power on. Temperature can be adjusted to a cooler or warmer state
with the “Temperature” knob. You can vary the setting according to the readout of your CI-340
Photosynthesis System.
There is a “Remote Input” socket on the Controller panel. This can be used by remote control for the
purpose of automatically adjusting the system. The temperature control knob will set the minimum
temperature for remote control, so set the knob on the controller panel counterclockwise (all the way
cold) for remote control.