Technical information

RECHARGING
3/31/2008 Rev. 4.3 10-3
• Never unplug the charger/adapter during use or disconnect the DC coupler from the
charger/adapter when the DC coupler is being used.
• Be sure to unplug the charger/adapter when you have finished using it.
• Battery charging will stop if you connect the DC coupler to the charger/adapter, but it will resume
as soon as you disconnect it.
• The charger/adapter can be used with a power supply between 100 and 240 V AC. Contact your
Canon Service Center for information about plug adapters for overseas use.
• To prevent equipment breakdowns and excessive heating, do not connect this charger/adapter to
voltage converters used by travelers, or special power sources such as on aircraft, ships or DC to
AC inverters, etc.
• Use only specified CI-340 products with this charger/adapter.
• Do not disassemble the charger/adapter (or DC coupler), and do not expose it to water, shock or
vibration, or to direct sunlight. Avoid exposure to high temperatures, such as a closed car in hot
weather, and do not leave it near heat-radiating equipment, such as a stove or heater.
BATTERY CHARGER SPECIFICATIONS
Power supply: 100 to 240 V AC, 50/60Hz
Power consumption: 24 W
Rated output:
(Nominal)
Adapter mode: 7.2 V, 2.0 A DC
Charge mode: 8.4 V, 1.5 A DC
Operating temperature range: 0 – 40
o
C (32 – 104
o
F)
Dimensions: 75 x 51 x 99 mm (3 x 2 x 3
7/8
in.)
Weight: 215g (7
5/8
oz.)
Weight: Weight and dimensions are approximate. Errors and omissions excepted. Subject to change
without notice.