Specifications

27
Replacing the Halogen Oven Light
WARNING: Ensure the appliance is switched off before replacing the lamp to avoid the possibility of
electric shock.
– Let the oven cavity and the heating elements cool down;
– Switch off the electrical supply;
Top Right Lamp:
– Remove the protective cover "C" (fig. 8);
– Replace the halogen lamp "B" with a new one suitable for high temperatures having the following specifications:
230V and same power (check watt power as stamped in the lamp itself) of the replaced lamp.
IMPORTANT WARNING: Never replace the bulb with bare hands; contamination from your fingers
can cause premature failure.
Always use a clean cloth or gloves.
– Refit the protective cover;
Left Lamp:
– Remove the left wire rack by unscrewing the fixing screws.
– Press down from the top the protective cover "A" (fig. 8) and remove it by rotating on the lower side.
IMPORTANT: never use screwdrivers or other utensils to remove the cover "A". This could damage the enamel
of the oven or the lampholder. Operate only by hands.
– Replace the halogen lamp "B" with a new one suitable for high temperatures having the following specifications:
230V and same power (check watt power as stamped in the lamp itself) of the replaced lamp.
IMPORTANT WARNING: Never replace the bulb with bare hands;
contamination from your fingers can cause premature failure.
Always use a clean cloth or gloves.
– Refit the protective cover "A" operating in reverse order.
ATTENTION: the notch in the inner edge of the cover must be oriented
toward the lamp.
– Assemble the left wire rack.
Note: Oven bulb replacement is not covered by your guarantee.
A
B
B
C
1
2
A
A
Fig. 8
WRONG
CORRECT