manual

16
- Lubricating the cocks periodically
This must be done by qualified personnel whom you must contact also if the
appliance is malfunctioning.
It is however advisable each time work is done on the cocks, to change the cocks
and gasket.
- Knobs
-
The gas hob burner knobs are ONLY TO BE REMOVED for servicing
(regulating the minimum flame) and NOT for cleaning.
- They are to be replaced in the correct order and in their original position.
Any changes will result in the appliance malfunctioning.
PROBLEMS AND SUGGESTIONS
Problem Suggestions
The gas flow seem irregular - Check that the gas cock is open.
- Clean the holes of the flame breaker and the
nozzle.
- Check the position of the burner.
Smell of gas in the room - Check the knobs are in the OFF position
- Check the condition of the feeding pipe and
its connections.
The pilot light of the electric
hotplate or griddle is not
working
- Make sure the lead is connected to the
mains.
If the problems persist or cannot be remedied with the above suggestions, contact
the nearest
Assistance Centre
explaining the
problem found, the model, the
item and serial number of the appliance written on the guarantee certificate.