Installation instructions

be activated if the intensive speed is functioning.
The “clean air” function is activated by pressing key E for 2
seconds when the appliance is switched o . This switches
the motor on for 10 minutes every hour at the  rst speed.
During functioning a rotary movement of the peripheral
segments must be visualised on the display. When this time
has passed the motor switches o and the  xed letter “C” must
be visualised on the display until the motor re-starts after 50
minutes for another 10 minutes and so on. Press any key apart
from the light keys to return to normal functioning. Press key
E to deactivate the function.
• Active carbon/grease  lter saturation:
- When display item C  ashes, at a speed where it alternates
with the letter F (e.g. 1 and F), the grease  lters must be
washed.
- When display item C  ashes, at a speed where it alternates
with the letter A (e.g. 1 and A), the carbon  lters must be
replaced.
After the clean filter has been positioned correctly, the
electronic memory must be reset by pressing button A
for approximately 5 seconds, until the indication F or
t shown on the display C stops  ashing.
THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR
EVENTUAL DAMAGES CAUSED BY BREACHING THE ABOVE
WARNINGS.
- 21 -