User manual

Standalone DVR Manual
when events occur. Set display duration by moving the slide bar
or inputting a number directly. (1sec~60sec)
ᐳG Enable Live Popup: Enable/ Disable live displaying
popup when events occur. Set display duration by moving the
slide bar or inputting a number directly. (1sec~60sec)
ᐴG Output control: Operating mode for alarm outputs.
ؼG Cut Output: Enable/ Disable stopping Alarm out signal
after 1 second.
ؼG Keep Output: Enable/ Disable keeping Alarm out signal
ᐵG Enable / Disable the function that turns the digital
output state to “OFF” state when a channel is selected.
ᐶG Enable Ignore MD Event Delay: Enable/ Disable and
set duration between motion detection events. Set delay duration
by moving the slide bar or inputting a number directly.
(1sec~200sec)
ᐷG Enable Auto Light Return to Normal: Enable/ Disable
Automatic turning off lights for PTZ cameras. Set delay duration
by moving the slide bar or inputting a number directly.
(1sec~200sec)
ᐸG Event duration.
୔G Sec : second / 1800s (30minutes)