User manual

49
Standalone DVR Manual
Recording Configuration
User can set the DVR to record video with specified perimeters. The
DVR will start recording in the following cases:
ᐭG
When user presses the button in the system front panel
for manual emergency recording.
ᐮG
When user clicks on button from the control panel in the
surveillance screen for manual emergency recording.
ᐯG If schedule is set up to record at certain times of the day.
ᐰG When motion detection mode is enabled. Recording will
start when any change is detected in channel pixel frames
ᐱG When a sensor is triggered.
ᐲG When a ‘Video Loss’ is triggered (The other channels will
start recording).
The user can use this menu to configure the DVR to start recording
in different types of situations
[Screen 3-20] Record Configuration