User manual

Standalone DVR Manual
I/O control Panel
The output control button allows the user to manually control the
output of the connected device. The output is connected to an
I/O Relay Box (IRB-02), which then sends pulse signals to
external devices such as parking gates which require pulse
signals to operate.
ᐭG Click to manually change the digital output state of the
selected channel. Click to toggle the output state to ON, and
click again to toggle the output state to OFF.
Ȅ This button controls the on/off output to the DVR set side.
Ex) On/Off to the dry-type of alarm devices.
ᐭ
͑