User Manual Standalone DVR HL Manual v1.
Content & General Warning Contents CONTENTS 1 NOTICE BEFORE USING PRODUCT 7 SAFETY WARNING & PRECAUTION 8 1. PRODUCT DESCRIPTION 14 PRODUCT SPECIFICATION 15 Package Contents 17 Front Panel Layout 18 LED Status Lights 18 USB Port 18 CD/DVD-RW (Optional Type) 18 Front Panel Buttons 18 Rear Panel 19 Remote Control Unit Layout 20 2.
Content & General Warning NETWORK CONNECTION 25 HARD DISK DRIVE 25 POWER CONNECTION 25 SYSTEM INSTALLATION COMPLETE 25 3.
Content & General Warning Sensor In & Alarm Out Configuartion 53 Alarm Schedule Configuration 53 PTZ CONFIGURATION 55 SYSTEM CONFIGURATION 56 On Screen Display(OSD) Configuration 56 Digital Zoom OSD 57 Camera Configuration 68 Storage Configuration 59 Network Configuration 60 DDNS Configuration 61 Streaming Configuration 62 Date and Time Configuration 64 User Management Configuration 66 User Mail Server Configuration 68 System Information 69 BACKUP 70 LOG VIEWER 71 4.
Content & General Warning NETWORK EVENT CONFIGURATION 85 RECORDING CONFIGURATION BY EVENTS 86 Recording Duration Configuration by Events 87 Recording / Schedule Configuration 89 PTZ CONFIGURATION Preset Configuration 90 91 NETWORK CONFIGURATION 92 SYSTEM CONFIGURATION (GENERAL TAB) 93 System Configuration (Account Tab) 94 System Configuration (Version Tab) 95 5.
Content & General Warning Enhanced Function for Server List/Surveillance Area 119 OSC(On Screen Command) Function 120 E-MAP CONFIGURATION 121 EVENT LIST/ REALTIME EVENT VIEW 122 Event List/ Search Event View 123 RECORD 124 Continuous Recording (On / Off) 124 MD(Motion Detection) Recording 125 Emergency Recording Command Button 126 PLAYBACK 127 Playback Mode 127 Search Filter Button 127 SEARCH To end Remote Search BACKUP 129 129 130 Backup Manager 131 Backup Procedu
Content & General Warning Web Client Log In 147 ActiveX Installation 148 USING WEB CLIENT 149 Live 149 Splite Display Mode 150 Full and Zoom Screen Browser Toggle Mode 151 PTZ Control 152 Audio Control 153 Remote Screenshot & Recording 153 SEARCH 154 PLAYBACK 155 SETUP 155 Streaming Setup 156 Recording Setup 157 7.
Content & General Warning Notice before Using Product Please beware of the following precautions before installing the DVR.
Content & General Warning Safety Warning & Precaution The following warnings and cautions are for your own safety and to prevent damage of the DVR system and/or other properties. Warning (Review these warnings or you may be seriously injured or killed) Turn off the system before installing the system. Do not plug in several electric devices to the same outlet.
Content & General Warning Avoid any place with moisture, dust, or soot. [This can cause fire or electric shock] Do not attempt to disassemble, repair, or modify the system on your own. It is extremely dangerous due to high voltage running through the system. [This may cause fire, electric shock, or serious injuries] Install the system in a cool place without direct sunlight and always maintain room temperature. [This may cause fire] When pulling the power cable from the plug, do so gently.
Content & General Warning Caution (Review these cautions or you may be seriously injured or cause property damage) Do not install the system in a place with high magnetic, electric wave, or wireless devices such as radio or TV [Install the system in a place without magnetic objects, electric frequencies, or vibration] Prevent any substances from being inserted into the system [This may cause system breakdown] The system can be damaged from a strong impact or vibration [The system may not operate properly
Content & General Warning Other Important Warnings & Cautions x Users are recommended to read the relevant details carefully so as to operate the product Important properly and without harm. x Using incorrect type of battery may result an explosion. Dispose the replaced battery under the local laws and regulations regarding the disposal of battery. x This unit is indoor equipment and some of components and cables are limited to indoor usage.
Content & General Warning x Excessive current from the product and the camera may result in an electric shock and or damaging the system. x Do not operate or store the product in the following places. T An area that is either too cold or too hot. See Specification. T An area of high humidity, or in front of an air-conditioner, or in places subject to sudden temperature changes. T An area where there is excessive dust.
Content & General Warning entity thus periodic maintenance is required for proper operation of the product & its life cycle. x The product is designed for users to configure their own interface. However a user configuration error could lead to system malfunction. This product should be set up and custom configured only by certified installers only.
Product Description 1. Product Description Product Overview “Standalone DVRs" are Standalone DVRs that support H/W compression, Real-time Display, and Two-way Audio function. Their stability was maximized by adopting Embedded Linux as the Operating System. By supporting strong Remote Surveillance and Remote Playback through network, they can be the optimized security solutions for IP Surveillance Generation.
Product Description Product Specification Specification SSA-0412HL SSA-0824HL SSA-1648HL Video Input 4 8 16 Video H.
Product Description Front LED Record, Alarm, Network Backup Media DVD-RW, USB Memory Stick Firmware Upgrade DVD-RW, USB Memory Stick, Network** Search Modes Calendar, Event, Quick, Time Watch Dog Hardware Watchdog Support PTZ Connection 1 Port Terminal Block, RS-485 PTZ Protocol Pelco-D, Samsung SCC-641 and approx. 90 protocols support Network 1 Port Ethernet 10/100 Base-T Network Protocol TCP/IP, HTTP, FTP, DHCP, PPPoE, SMTP DDNS www.ddnsservice.com/ www.dyndns.
Product Description Package Contents DVR System Adapter Remote Control Unit S/W Installation CD Power Cable (Option) User Manual (Option) Batteries (AAA) (Option) Mouse (Option) 17
Product Description Front Panel Layout LED Status Lights REC EVENT NET LED on when recording LED on when events occur LED on when network is connected USB Port USB Storage can be connected for backup and F/W upgrade purposes. CD/DVD-RW (Optional Type) Blank DVD/CD (depending on the optical drive type) can be inserted to back up data or to upgrade the firmware.
Product Description Rear Panel 4CH 1 2 3 4 5 6 7 8 9 10 11 12 13 8CH 2 3 4 5 6 5 6 1 7 8 9 10 11 12 13 7 8 9 10 11 12 13 16CH 2 3 4 1 ᐭ ᐮ ᐯ ᐰ ᐱ ᐲ ᐳ ᐴ ᐵ Video In CVBS Out SPOT Out CVBS Out Audio In Audio Out VGA Out RS-232 Network Port ᐶ Sensor In ᐷ Alarm Out ᐸ ᐹ RS-485 Power In [BNC]Camera Input [BNC]Main Composite Video Out [BNC]SPOT Out [RCA]Main Composite Video Out [RCA]LINE(MIC) Audio In [RCA]Audio Out VGA Output RS-232 Serial COM Port [RJ-45]Ethernet Port Sensor Connec
Product Description Remote Control Unit Layout POWER Power ON/OFF FREEZE Pauses live view screen for quick scan/review of event REC MENU BACK Start Recording Launches the menu Back from the current action Navigate through menus. Select the item.
Product Description 2.
Product Description Video Connection Input This series of DVR systems have a total of 16 camera inputs for recording. Either NTSC or PAL video signal cameras maybe used in this system and will be set in the system configuration menu. Please do not mix different video signal types into 16 channels. All 16 must either be NTSC or PAL. (ఐ Max Video Input number varies by each products.) Output ᐭG CVBS: Composite video signal will be sent through the BNC port for video output.
Product Description Audio Connection Input ᐭG LINE (MIC) Input: This DVR supports up to 4 audio inputs. Please refer to the back panel of the DVR for input locations. ᐮG Default audio input signal level is Line-In. An additional device should be installed to use MIC-In level of audio input. Output This DVR has 1 output for audio out. Either TV’s internal audio input can be connected directly to DVR’s audio output or an externally powered speaker can be connected to the audio output for sound.
Product Description Alarm/Sensor/PTZ Connection Alarm This product does not supply power to an alarm internally. The alarm type that should be used is Dry Contact Type. Up to 1 alarm can be connected. ᐭG Use two wires for connection. ᐮG Depending on type of Alarm used, please choose the right type from DVRs Alarm Menu. Info NO Normal Open NC Normal Close Sensor This product only supports sensors that act as simple mechanical switches (dry-contact type sensors.) Up to 4 sensors can be connected.
Product Description Network Connection DVR has an Ethernet port in the rear for standard RJ45 cable connection. Hard Disk Drive DVR System supports only SATA (Serial ATA) connection. Hard drives must be SATA and up to 2 hard drives may be connected. ᐭG Turn off the power after system shutdown ᐮG Open the top casing cover. ᐯG Please make sure the hard drive is properly seated in the hard drive rail ᐰG Install SATA cable/power cable properly to the hard drive. Please double check the connections.
Standalone DVR Manual Keyword Glossary for this chapter Words Alarm Pages 25, 52, 53 Backup 70 Camera Menu 68 Date & Time 36, 64 DDNS 60, 61 Default Factory Reset Email 58, 66, 69 66 ID & Password 41, 66 Live Screen 27,28 Network 25, 60 OSD 56,57 Playback 39 PTZ Menu 24, 36, 55 Recording 38,49,51 Search System Information 39,43~48 69 System Menu 41, 56 User Management 66, 68
Standalone DVR Manual Starting the System Please make sure the power cord in the rear is firmly connected. Press the power button in front of unit for initial start. At initial power-up, the system will start automatically when the power cord is connected. Main screen should come up with connected video screens.
Standalone DVR Manual c d [Screen 3-2] Status Panel e ᬆ Status icon ᬆ is explained in the following: ᐭ Recording is in progress ᐮ Scheduled recording mode is active ᐯ Sensor input has been triggered f g ᬆ ᬆ ᐰ Motion detection has been triggered ᐱ CH-01: Channel name / Camera name Each channel is selectable from the split screen view for more detailed picture and controls. ᐭG Watching a single channel with full screen mode.
Standalone DVR Manual Control Panel At the bottom of main screen, a convenient DVR control panel is located. The DVR buttons and control is grouped into 3 types of controls, depending on the current mode, the grouping will come in handy. The following is quick overview. The control panel provides 3 functions by each category.
Standalone DVR Manual Split Screen Modes: Left Control Panel Full Screen View [Screen 3-3] Full Screen View View a channel in full screen, by double clicking on a channel [Screen 3-3]. Alternatively, click on button to full-size a selected channel. Double clicking on the screen while in full screen mode will turn back to previous split screen mode Clicking channel.
Standalone DVR Manual 4 Split Screen View [Screen 3-4] 4 Split Screen View To view the DVR in 4 channel division, click button. [Screen 3-4] In addition, by clicking button once more, the next 4 set of channels will be shown and so on.
Standalone DVR Manual 6 Split Screen View [Screen 3-5] 6 Split Screen View To view the DVR in 6 channel division, click button. [Screen 3-5] In addition, by clicking button once more, the next 6 set of channels will be shown and so on. Y X [ Z \ ] _ ^ XW XZ ` XX XY X[ X\ X] In the above diagram, the ‘X’ indicates channels which will not be shown.
Standalone DVR Manual 8 Split Screen View [Screen 3-6] 8 Split Screen View To view the DVR in 8 channel division, click 4] button. [Screen 2-4- In addition, by clicking button once more, the next 8 set of channels will be shown and so on.
Standalone DVR Manual 9 Split Screen View [Screen 3-7] 9 Split Screen View To view the DVR in 9 channel division, click 5] button. [Screen 2-4- In addition, by clicking on button once more, the next 9 set of channels will be shown and so on. X Y Z XW XX XY [ \ ] XZ X[ X\ ^ _ ` X] In the above diagram, the ‘X’ indicates channels which will not be shown.
Standalone DVR Manual 16 Split Screen View [Screen 3-8] 16 Split Screen View To view the DVR in 16 channel division, click button.
Standalone DVR Manual Menu Bar Panel: Current Time, HDD Usage and PTZ Date and Time Displays Current Date & Time of live image. Displays HDD Usage Display when click on . Displays current usage of HDD storage in percentage (%). Basic PTZ Control Click on “ ” button to change the center side of panel to the PTZ control panel. This control panel provides PTZ control function to a video channel at which PTZ configuration is set.
Standalone DVR Manual Below is showing the initiated Screen Control.
Standalone DVR Manual Power Off / Restart / Log Off [Screen 3-10] Click on “POWER” button. Select option. Press “OK” to proceed or “Cancel” to exit back to main window. Emergency Recording / Manual Recording When user presses the button, Emergency Manual Recording mode will be turned on and will overwrites on all other recording schedules unless Emergency manual recording is de-activated by user.
Standalone DVR Manual Instant Video Playback When user presses the button, right menu panel will be switched on to as shown below. When in playback mode, the screen will indicate new tools at the bottom right side the panel. The control panel provides playback controlling functions for speed and direction of all channels. Playback Mode DVR is able to playback any recorded data with many different function modes of playback.
Standalone DVR Manual Split Screen Modes Left bottom side of the status bar will have screen split controls G Refer to the ‘Split Screen Modes’ section for operation Playback Date and Time ¢ £ ¤ ¥ ¦ It shows the current date and time of the video that is being played back. The speed of playback time will vary depending on the speed of playback. Playback Controls Controls for playback are located at the bottom right of the status bar.
Standalone DVR Manual DVR System Menu [Screen 3-12] DVR System Menu On the surveillance screen click the the menu mode.
Standalone DVR Manual Initial Menu & Log In ===Î Î admin ===Î (none) [Screen 3-13] Initial Menu Initial Menu screen will open when button is clicked. Enter ID and Password when prompted. Default System ID and Password ID: Password: admin (none) Leave it blank.
Standalone DVR Manual Search Menu Search & Quick Search User can access different types of Search Menu from DVR System Menu or using Quick Search from Live Display Menu. [Screen 3-14] Calendar Search Window Click to select hour Recorded data Click button to run Calendar Search [Screen 3-14] A calendar will open. Dates with available data will be highlighted in red box [Screen 3-14]. Click on the date.
Standalone DVR Manual G HOUR indicates from 0 hour to 23 hour. Searchable data will be indicated in red. G Time bar indicator will open. Hours with available data will be indicated by red bars. Click on the time bar to select an hour. Selection [Screen 3-15] Time bar Indicator (Minute) In the time bar indicator for minutes, minutes with available data will be indicated by colored bars. MIN indicates from 0 minute to 59 minutes. Searchable data will be indicated in color.
Standalone DVR Manual Calendar Search – DST(Daylight Saving Time) [Screen 3-16] DST (Daylight Saving Time) ᐭ DST(Daylight Saving Time) In countries that use daylight savings time, the last day of daylight savings time will be recorded as a 25 hour day.
Standalone DVR Manual Event Search On the left side of search screen [Screen 13-17], click on button to start the event search. Event search [Screen 4-6] will be shown. [Screen 3-17] Event Search A database of all the events occurred is kept along with the date and time. Easily search for video footage from specific events. Using the Event Search (How To) ᐭ Select the channel to search. ᐮ Select type of event: VIDEO LOSS, MOTION DETECT, and SENSOR.
Standalone DVR Manual ᐱ Choose an event from the result and click button, the display mode will be changed to playback mode, and then playback will be started from the time that the selected event was stamped.
Standalone DVR Manual Specific Time Search [Screen 3-19] On the left side of search screen, click on button to start the time search. Time search [Screen 3-15] will be shown. [Screen 3-19] Time Search Use time search to jump right to a specific time to watch recorded video. Using Time Search (How To) ᐭ Input the date into DATE field ᐮ Input the time into TIME field: Hour, Minute, Second ᐯ Click or button, the display mode will be changed to playback mode and it will start playing from the selected time.
Standalone DVR Manual Recording Configuration User can set the DVR to record video with specified perimeters. The DVR will start recording in the following cases: button in the system front panel ᐭG When user presses the for manual emergency recording. button from the control panel in the ᐮG When user clicks on surveillance screen for manual emergency recording. ᐯG If schedule is set up to record at certain times of the day. ᐰG When motion detection mode is enabled.
Standalone DVR Manual Configure the recording options as follows: ᐭ OVERWRITE: Enable overwrite to allow new data to be overwritten over the oldest data when storage space is full. ᐮ ENABLE LIVE AUDIO: Enable to output recording audio. ᐯ PRE: Pre-recording configuration to record before an event has been occurred. ᐰ POST: Post-recording configuration to record after an event has been occurred.
Standalone DVR Manual Recording Schedule Configuration ᐭ ᐮ ᐯ [Screen 3-21] Record Schedule Configuration Configure recording schedule ᐭG Select a channel to schedule ᐮG Select type of event to schedule ᐯG Click and drag using mouse cursor to select the specific time schedule. Schedule may be selected hour by hour.
Standalone DVR Manual Event & Alarm Configuration ᐭ ᐮ ᐯ ᐰGG ᐱ [Screen 3-22] Event & Alarm Configuration Select which events will trigger which type of notification in this configuration screen. ᐭG Select a channel to configure. ᐮG Select which of the event triggers would activate an event. ᐯG Configure preset settings for each event. ᐰG Select the response (type of notification) of DVR system to the events selected in ᐮ. ᐱG Specify the duration time that an alarm stops automatically.
Standalone DVR Manual Sensor In & Alarm Out Configuration ᐭGG ᐮ ᐯGG [Screen 3-23] Alarm In & Alarm Out Configuration Configure SENSOR In or ALARM Out box to configure settings for SENSOR In or ALARM Out. In the above picture, each rows mean Video channels and each columns mean the channel of Sensor or Alarm. It’s available to configure multiple Sensors or Alarms to a Video channel and to configure multiple Video channels to a Sensor or Alarm channel.
Standalone DVR Manual Alarm Schedule Configuration ᐭ ᐮ ᐯ [Screen 3-24] Alarm Schedule Configuration Configure alarm schedule ᐰG Enables alarm schedule configuration. ᐱG Select a schedule option. ‘’NORMAL’, the alarm is schedule to normal action. ’ALARM ON’, the alarm is schedule to always active. ’ALARM OFF’, the alarm is schedule to always inactive. ᐲG Click and drag using mouse cursor to select the specific time schedule. Schedule may be selected hour by hour.
Standalone DVR Manual PTZ Configuration ᐭ ᐮ ᐯ ᐰGG ᐱ ᐳ ᐲ ᐴ [Screen 3-25] PTZ Configuration Configure PTZ protocol for each channel, ᐭ Select channel to setup PTZ ᐮ To activate a PTZ, please click PTZ ENABLE ᐯ Select the appropriate PTZ PROTOCOL. ᐰ Select the right PTZ Address ID (1-255) ᐱ Move PTZ camera direction to a position. ᐲ Save PTZ preset number by pressing the “SAVE” button after setting the “PRESET” number. ᐳ Set PTZ command time interval. ᐴ Click “Apply” or “OK” to save changes.
Standalone DVR Manual System Configuration OSD (On Screen Display) Configuration [Screen 3-26] OSD Configuration Configure OSD of the live surveillance video channels. The following table is a detailed explanation of OSD setting.
Standalone DVR Manual Digital Zoom [Screen 3-27] Enabling Digital Zoom In the screen, it enables Digital Zoom function by checking the Enable Digital Zoom check box. Digital Zoom function is for enlarging the Video Image for cameras even do not support zooming function. As the above screen, Digital Zoom icon will be displayed when moving the mouse pointer over the selected channel. Mouse clicking the icon, Digital Zoom will be activated as the screen of the following page.
Standalone DVR Manual Camera Configuration ᐭ ᐳ ᐮ ᐯ ᐴ ᐵ ᐰ ᐱ ᐲ [Screen 3-29] Camera Configuration Adjust color settings for each channel, and other channel/camerarelated setting ᐭG Select a channel to configure (Indicated with Yellow) ᐮG Configure HUE, SATURATION, BRIGHTNESS, CONTRAST for video channels. ᐯG Recall the factory default configuration.
Standalone DVR Manual ᐲG Camera Type: Select camera video signal by regions. ᐳG Configure motion detection area with mouse dragging or arrow buttons & OK button of the remote control unit(RCU). ᐴG Clicking “CLEAR” button unsets the entire area of motion detection area. Clicking “ALL” button sets the entire video area to motion detection area. ᐵG Configure motion detection sensitivity.
Standalone DVR Manual Network Configuration ᐰGG ᐭG Ex) 192.168.1.100 Ex) DVR MAC ADD. Or Custom Ex) 255.255.255.244 Ex)) 192.168.1.1 ᐮG Ex) DVRID.DDNSSERVICE.COM:8080 Ex) 192.168.1.1 ᐯG [Screen 3-31] Network Configuration Configure network connection, ᐭ Network settings allow Static IP, Dynamic IP, PPPoE ᐮ The form to input setting values for Static IP ᐯ The form to input setting values for PPPoE. ᐰ DDNS is supported by DDNSSERVICE.COM and DynDNS ᐱ The form to input setting values for DDNS by ᐰ.
Standalone DVR Manual Activating DDNS R [Screen 3-32] DDNS Configuration ᐭ Select Network TypeG ᐮ Select DDNS Service If Needed.G ᐯ By default your automated DVR Host ID is your MAC address of your DVR. G ᐰ To Creating a Customized Host ID: Enter the Desired ID on ID field. G ᐱ Click “CHECK” for an availability. Name other if taken by other user.G ᐲ If Successful, DVR will generate new DDNS Address. G EX) http://yourid.ddnsservice.
Standalone DVR Manual Streaming Configuration ᐭ ᐮ ᐯ [Screen 3-33] Streaming Configuration Configuration streaming environment, ᐭ Streaming/ Remote Setup/ Web Port No.
Standalone DVR Manual Forwarding setting of an IP router automatically when the DVR set is connected to an IP router in a LAN environment. ؼG It sets the network port number for both the DVR set and an IP router side by the setting value ᐭ without additional configuring an IP router. G AUTO B/W (Automatic Bandwidth) x It sets the DVR streaming bandwidth with the value of user configuration.
Standalone DVR Manual Date & Time Configuration ᐯ Calendar ᐰ ᐭ ᐮ ᐱG [Screen 3-34] Date & Time Configuration Configure system date & time setup, ᐭ Check and configure the local time zone. ᐮ Configure the time difference and location. ᐯ Change current date. Click on section to open calendar [Screen 5-17]. Select the day, month, year, hour, minute, second with the mouse.
Standalone DVR Manual [Screen 3-35] Date Setup ᐶG Move from month to month by clicking Í, Î ᐷG Select a date by clicking on a day in the calendar. ᐸG Click "Apply" or "OK" to save changes.
Standalone DVR Manual User Management Configuration ᐭ ᐮ ᐯ ᐰ ᐱ ᐳ ᐴ ᐲ ᐵ [Screen 3-36] User Management Configuration user management, ᐭ Select user level to configure [ADMIN, MANAGE, USER1~4] G Warning: The factory default setting value for the password of the גADMIN דaccount is empty. ᐮ Edit user email address ᐯ Configure the account level (the available user functions) for each user. ᐰ Password: Settings will be applied only if the correct password is entered in "Current Password.
Standalone DVR Manual window will not pop up when opening the menu. ᐴ Login Timeout: After the most recent login, the login window will not pop up for certain time duration. a. The time is in seconds, and the default value is 60 seconds.
Standalone DVR Manual User Mail Server Configuration ᐮ ᐯ ᐰ ᐱ ᐲ ᐳ ᐭ ᐴ [Screen 3-37] Mail Server Configuration Click SETUP button in the above screen to configure e-mail server information. ᐭ SETUP: Click to open a pop up window for configuring email server information. ᐮ Input e-mail server address ᐯ Input e-mail server port number. ᐰ If this box is checked, login necessary at the time of set of the e-mail server ᐱ Input e-mail user ID ᐲ Input e-mail password. ᐳ Click OK to save settings.
Standalone DVR Manual System Information [Screen 3-38] System Information In system information menu, a number of system information is displayed, and user can also upgrade the DVR firmware. ᐭG Upgrade ؼG Select the storage medium which contains the upgrade firmware ؼG Press the upgrade button to start upgrading the firmware ؼG If the storage medium contains a multi-national language pack or the web client pack, they will be upgraded altogether.
Standalone DVR Manual Backup ᐭ ᐮ ᐯ ᐰ ᐱ ᐲ [Screen 3-39] Backup Record data backup with the menu, ᐰG Select the backup channel ᐱG Select backup medium (CD-ROM, USB Storage) ᐲG Select the type of backup data.
Standalone DVR Manual Log Viewer ᐭ ᐮ ᐯ ᐰ ᐱ [Screen 3-40] Log Viewer Search system logs, ᐭ Select the channel ᐮ Select the event ᐯ Start date, time ᐰ End date, time ᐱ Click "SEARCH" G Results will be displayed d in i the th following f ll i screen.
Standalone DVR Manual 4.
Standalone DVR Manual DVR Platform Installation Installation Guide ᐭG ᐮG ᐯG ᐰG ᐱG ᐲG ᐳG Run Setup.exe program with admin privilege or “Run as Administrator”. Setup Language (System Locale Language by Default if supported). Check DVR Platform™ Version Setup Type Selection (Choose Complete when not sure). Click on “Install” button to start the installation. Wait during the installation progress. Click on “Finished” button when setup is completed.
Standalone DVR Manual Launching DVR Platform CMS Click on DVR Platform icon from desktop. Wait until the initial diagnosis process is completed. Storage Space Setup Layout G Important ! The CMS requires a remote storage space called “Bank” before running the program. Bank size & location MUST be assigned. User not using remote recording feature still need to create minimum of 1 bank to proceed to next step.
Standalone DVR Manual banks first G If “Overwrite” is not selected, standalone client does not overwrite when the banks are full ᐮG Meta Data Path: Select a local folder for storing the Meta Data when recording (Default Location recommended) G Meta data (Meta Information): Additional information about the recorded data. It contains links between the recorded events and video, and the actual storage files.
Standalone DVR Manual Creating Recording Repositories(Banks) ᐭG Select a HDD Drive for creating recording repositories. ᐮG Set the number of banks to create. ᐮ͑ Create banks by clicking “CREATE BANK” button. ᐯG Create banks by clicking “CREATE NABK” button.
Standalone DVR Manual ᐰG Select the Local Drive with newly created banks to see the in which File banks were created.
Standalone DVR Manual Configuration GUI Main Feature ᐭ͑ ᐮ͑ ᐯ͑ ᐭG Configuration List Tab All configuration items are located on the Top Configuration Bar. Click a configuration icon to move to another configuration window. ᐮG Configuration Window Detailed configuration settings for each configuration item are located here. ᐯG Common Command Button ؼG Virtual Keyboard : View Virtual Keyboard Window ؼG ALL CHANNEL : apply All Channel ؼG OK: Close window after applying changes.
Standalone DVR Manual Display Configuration ᐭG RGB/YUV2/UYVY: Select an Overlay Surface type ؼG Color format depends on the graphic card ؼG Default Setting is YUV2 ᐮG Fit To Screen: Select to fit standalone client window size to the monitor resolution ᐯG Use Windows Lock : Enable/Disable windows Lock ᐰG Show Connection: Enable/Disable showing connection information in the display area ᐱG Status Bar: Select whether to keep the status bar visible ؼG Auto Hide: hide it automatically in the display area
Standalone DVR Manual ᐲG OSD Color: Set the text color for the information OSD character on the display panel.
Standalone DVR Manual ᐭG Add: Add a device with the information entered in the Input Form.
Standalone DVR Manual Device Configuration Remote Configuration of Each Device G This Device Configuration window does not support all Video Servers and IP cameras.
Standalone DVR Manual MD (Motion Detection) Configuration ᐭ Device List: The entire list of registered cameras in all servers. ᐮ Device Information: Displays information about the selected device. ᐯ MD Area: x Configure the MD area with the mouse by click-n-drag.
Standalone DVR Manual Bookmark Configuration ᐭ͑͑ ᐮ͑͑ ᐯ͑͑ ᐲ͑͑ ᐴ͑͑ ᐳ͑͑ ᐵ͑͑ ᐰ͑ ᐱ͑ ᐭG Bookmark List ؼG When selecting an added bookmark by mouse clicking, all relevant device names will be displayed at Device List atᐮ ᐮG Device List: Device Lists of a selected bookmark at ᐭ ᐯG Device List: All registered device lists ᐰG Add: Add Bookmark ᐱG Remove: Delete Bookmark ᐲG <<: Register all devices to a bookmark ᐳG <: Register selected devices to a bookmark ᐴG >: Unregister devices from a bookmark ᐵG >>: Unr
Standalone DVR Manual Network Event Configuration ᐓ͑͑ ᐕ͑͑ ᐔ͑͑ ᐖ͑͑ ᐮ͑͑ ᐭ͑͑ ᐯ͑͑ ᐰ͑͑ ᐱ͑ ᐭG Select a CH to configure a network event ؼG Network Event Information ᐓ CH: Channel name ᐔ Transmit Type: Select a data format that will be transmitted to panel. (All: Video, Audio and Event altogether) ᐕ Event: Name of the channel that will output the events that occurred in CH. ᐖ Audio: Name of the channel that will output the audio transmitted from CH.
Standalone DVR Manual Recording Configuration by Events ᐭ͑͑ ᐮ͑͑ ᐯ͑͑ ᐰ͑͑ ᐱ͑͑ ᐲ͑͑ ᐳ͑͑ ᐴ͑͑ ᐵ͑͑ ᐶ͑͑ ᐷ͑͑ ᐭG CHANNEL: Currently registered camera list of a server ᐮG EVENT: Enable/ Disable event ᐯG LIVE POPUP: Enable/ Disable live display channel popup when configured event occurs ᐰG EMAP POPUP: Enable/ Disable channel popup on the E-map window when configured event occurs ᐱG SOUND: Enable/ Disable Event warning sound when configured event occurs ᐲG ALARM: Enable/ Disable Alarm Out when configured event
Standalone DVR Manual Recording Duration Configuration by Events ᬅ ᐮ ᐯ ᐰ ᐱ ᬊ ᬋ ᐸ ᐴ ᐶ ᐵ ᐷ ᐭG Enable MD Recording Function: Enable/ Disable recording by Motion Detection. Set recording duration by moving the slide bar or inputting a number directly. (1sec~30min) ᐮG Enable Sensor Recording Function: Enable/ Disable recording by sensor detection. Set recording duration by moving the slide bar or inputting a number directly.
Standalone DVR Manual when events occur. Set display duration by moving the slide bar or inputting a number directly. (1sec~60sec) ᐳG Enable Live Popup: Enable/ Disable live displaying popup when events occur. Set display duration by moving the slide bar or inputting a number directly. (1sec~60sec) ᐴG Output control: Operating mode for alarm outputs. ؼG Cut Output: Enable/ Disable stopping Alarm out signal after 1 second.
Standalone DVR Manual Recording / Schedule Configuration ᐭG Enable the Schedule: Enable/ disable schedule recording.
Standalone DVR Manual PTZ(Pan/Tilt/Zoom) Configuration ᐭ͑ ᐯ͑͑ ᐮ͑ ᐰ͑͑ ᐱ͑͑ ᐲ͑͑ ᐭG Device List: The entire list of registered cameras in all servers ᐮG PTZ Device List: List of supported PTZ protocols(standalone client basically supports over 75 PTZ devices) ᐯG Device Information: Displays information about the selected device ᐰG PTZ Setting: Input PTZ setting values x Address: Input PTZ address x Serial Port: Select serial port number when using a local PTZ device ͑ ᐱ͑ PTZ Server: Information about a cent
Standalone DVR Manual Preset Configuration ᐭ͑ ᐮ͑͑ ᐯ͑͑ ᐳ͑ ᐰ͑͑ ᐱ͑͑ ᐲ͑͑ ᐴ͑͑ ᐵ͑͑ ᐶ͑͑ ᐭG Device List: All registered device lists ᐮG PTZ Configuration of Selected device ᐯG Preset: Preset number ᐰG Save: Preset position ᐱG Move: PTZ direction control ᐲG Preview: Preset preview ᐳG Scenario List: List of the registered presets After a scenario starts, it will move from the top of the list to the bottom, stopping at each preset for the designated ᐴ delay time, and move on the next preset.
Standalone DVR Manual Network Configuration ᐭ͑ ᐮ͑ ᐯ͑ ᐭG Network Information: Displays information about the network adaptor(LAN Card) and MAC address(PC’s LAN Card ID) of the current system ᐮG IP Address: IP address of the current system ᐯG Connect Management : reconnect delay and retry count setting
Standalone DVR Manual System Configuration (General Tab) ᐭ͑ ᐮ͑ ᐯ͑ ᐱ͑ ᐱ ᐲ͑ ᐰ͑ ᐳ͑ ᐭG SYSTEM INFORMATION: Displays basic information about the current system ᐮG CONFIG BACKUP & RESTORE BACKUP: Back-up system configuration to an XML file RESTORE: Restore system configuration from a backup file (.
Standalone DVR Manual System Configuration (Account Tab) ᐭ͑ ᐮ͑ ᐰ͑ ᐯ͑ ᐱ͑ §͑͑ ᐭG Use Auto Login: Select this option to automatically log in when standalone client is run.
Standalone DVR Manual System Configuration (Version Tab) ᐭ͑͑ ᐮ͑͑ ᐯ͑͑ ᐰ͑͑ ᐱ͑͑ ᐭG Module Name: Name of the engine used by standalone client ᐮG Build Date: Date that the engine was created ᐯG Modified Date: Date that the engine was modified ᐰG Version: Engine version ᐱG Path: Path to the directory that the engine was installed 95
Standalone DVR Manual 5. Standalone Client Function Manual Standalone Client Function Manual This chapter explains the functions of standalone client software.
Standalone DVR Manual Main GUI Feature Standalone client’s GUI has the following feature. Ȅ Main GUI features may be different for each client package. Multi-Tab Area Control Panel Playback Control Panel Device List Video Display Area Essential Info Display Area G Main GUI Feature Main Menu Frame of DVR Platform ཛ • Info Display: Logo / Time & Date / Net. Bandwidth Info / HDD Usage / Login • Device List: Server Name / Address / Connection Status • Main Control Panel: Display Ch.
Standalone DVR Manual Information Panel Information Panel: Displays the basic status of the program. ᐭ͑͑ ᐮ͑ ᐮ ᐯ ᐯ͑ ᐰ ᐰ͑ ᐱ͑͑ ᐭG Displays the current date ᐮG Displays the current time ᐯG Displays the current network usage and HDD usage (When there is no space in created banks, the program will overwrite in order of oldest banks first.
Standalone DVR Manual Menu Display Bar There’re tabs for video display, e-map and event list and some function buttons.
Standalone DVR Manual Server/ Device List It displays the list of currently registered devices in the standalone client. ᐮ ᐯ ᐭ ᐰ ᐓ ᐔ ᐕ ᐱ ᐲ ᐭG Select ‘Server List’ Tab ᐮG The upper-most item in the device list ᐯG Server: Displays the name and IP address of a registered server ᐰG Camera: A camera belongs to a server ᐓ Panel number͑ G The panel number will be displayed to be ‘0’ when the panel is not assigned to the display area.
Standalone DVR Manual Bookmark It displays the list of currently registered bookmarks. ᐮ͑͑ ᐯ͑ ᐓ͑ ᐔ͑ ᐕ͑ ᐭ͑͑ ᐭG Select the bookmark tab ᐮG The name of the bookmark group G Configure at the menu of Configuration>Device>Bookmark ᐯG Camera in bookmark: Displays the panel number and camera number of the currently displayed video. ᐓ Panel number G The panel number will be displayed to be ‘0’ when the panel is not assigned to the display area.
Standalone DVR Manual Control Panel Buttons for controlling standalone client are located in the Control Panel ᐭ͑͑ ᐮ͑͑ ᐰ͑͑ ᐱ͑͑ ᐯ͑͑ ᐲ͑ ᐭG Click tab to switch between General Control Panel / PTZ Control Panel / Audio Control Panel ᐮG Click to select the desired split display mode ᐯG Click to enter Local configurations ᐰG Click to enter Remote configurations ᐱG Click to display the next channels in current split display mode ᐲG Click to toggle Auto-Switching: When toggled on, the video channels in displa
Standalone DVR Manual PTZ Control Panel Panel For *PTZ cameras connected to standalone client. G PTZ(Pan/Tilt/Zoom): Horizontal movement / vertical movement / zoom in or out ᐮ͑͑ ᐭ ᐰ͑͑ ᐲ͑͑ ᐴ͑͑ ᐯ͑͑ ᐱ͑͑ ᐳ͑͑ ᐵ͑͑ ᐭG Continuous/ Non-continuous mode: PTZ Speed control G Continuous/ Non-Continuous mode ؼG Continuous mode: When a PTZ command button is clicked on, the camera will start operating. The camera will stop when the mouse button is released.
Standalone DVR Manual zoom/focus and selected preset Act ᐯG Select preset and touring number.
Standalone DVR Manual 2-Way Audio Control Panel G 2-Way Audio: 1-Way Audio is when DVR is sending audio to a standalone client. 2-Way Audio is when audio is sent from standalone client to the DVR, and the DVR broadcasts the audio.
Standalone DVR Manual I/O control Panel The output control button allows the user to manually control the output of the connected device. The output is connected to an I/O Relay Box (IRB-02), which then sends pulse signals to external devices such as parking gates which require pulse signals to operate. ᐭ͑ ᐭG Click to manually change the digital output state of the selected channel. Click to toggle the output state to ON, and click again to toggle the output state to OFF.
Standalone DVR Manual Playback Control Panel Search & Playback Control Panel.
Standalone DVR Manual Playback Command Buttons Move to previous frame Rev Playback with Speed Control Playback Backward Move to next frame Playback with Speed Control Stop (To Live Mode) Pause Play ᐭG Time Bar : Select an Hour(0~23)/ Minute for Playback(0~55) Minute Hour ᐔ͑͑ ᐓ͑͑ ᐓ͑ Current playback point ྀ Region where recorded video data exists ᐮG User Time Input Area : Input time directly for Playback ᐯG A tab to switch between calendar search panel and event search panel of the recorded data
Standalone DVR Manual Event List Panel This panel displays event lists in real time. ᐭ͑͑ ᐮ͑͑ ᐯ͑͑ ᐰ͑͑ ᐱ͑͑ ᐲ͑͑ ᐰG Filter: Select event type for real-time display ᐱG Server/ Camera: Camera and server name of the event that has occurred.
Standalone DVR Manual Display Region for Displaying Surveillance or Playback Video ᐭG On the top-left corner, the panel number is displayed. When a camera is added to the panel, the camera name is displayed there. In the middle, the current status of the panel is displayed.
Standalone DVR Manual Floating Bar Floating Bar with indicators and command buttons. ᐮ ᐰ ᬅ ᐯ ᐱ ᐲ ᐳ ᐴ ᐭG Indicator for Continuous Recording ᐮG Indicator for MD Recording ᐯG Indicator for Sensor Recording ᐰG Indicator for Schedule Recording ᐱG Indicator for *Digital Output ؼG When digital output is triggered by motion detection, or sensor, etc., the state (on/off) of digital output is shown by this indicator.
Standalone DVR Manual Using DVR Platform CMS Login Process Default Administrator Account ᐮ͑͑ ᐭ͑͑ G Default account Info ID: admin Password: admin ᐭG Login: Click to open login window ᐮG Logout: Click to logout the current account ᐯ͑͑ ᐰ͑͑ ᐱ͑͑ ᐯG Login window ᐰG Login Fail 1(Wrong password error) ᐱG Login Fail 2 (Unregistered ID error) ᐲ͑ ᐲG Access Denied: This error occurs when the user is not logged-in or tries a function that the user does not have access to.
Standalone DVR Manual G Resolution: Login again with a right login account or login in with an account which has each relevant access right to use a command. G Auto Login: Configuration>System>Account menu provides Automatic Login function which enables standalone client can run without login steps with the previous login status.
Standalone DVR Manual Assigning & Moving Server/Device List ᐭG Assigning: Assigning by selecting a Video Processing Server or an IP Device (IP Camera) for surveillance from the left Server List and moving the list to the right side Video Surveillance area by mouse drag & drop ᐮG Channel Moving/ Swapping: It moves ready-assigned video channels to other panels.
Standalone DVR Manual Disconnecting / Removing Assigned Channels Disconnecting / Removing assigned channels on the Video Display Area.
Standalone DVR Manual ᐮ͑͑ ᐮG Remove a video channel with ‘Delete Key’ or drag and drop a channel to the [Server List] while the target channel is selected Connection Fail
Standalone DVR Manual Connection Fail of the registered video channels ᐭ͑ ᐮ͑ ᐯ͑͑ ᐰ͑ ᐱ͑ ᐲ͑ ͑ ͑ ᐭ “iSync” Normal Windows prior to any connection ᐮ “Video Loss” message shown when the channel is in video loss state G Check Point for this case as follows: Check Video Cable between camera and DVR ID and password configured to “Device List” of the configuration ᐯ “Disconnected” message shown when video channel is disconnected from CMS/Client/DVR Setting ᐰ “Connection Fail” message is shown when server co
Standalone DVR Manual Controlling selected surveillance video channels ᐭ͑ ᐯ͑͑ ᐰ͑͑ ᐭG Selected: When selecting a video surveillance channel, the border of the channel changes to be green ᐮG Select All: Select All video channels in the video surveillance area.
Standalone DVR Manual Enhanced Function for Server List/Surveillance Area ᐭ͑ ᐮ͑ ᐭG Highlighting Video channels by mouse clicking a server list in the Server List panel. All highlighted video channels can be deleted just after clicking a server list. ᐮG Highlighting a server list by mouse clicking a video channel in the video display area. With this function, right clicking “Remote Search” button for remote search can be run easily.
Standalone DVR Manual OSC(On Screen Command) Function ᐭ͑ ᐮ͑ ᐯ͑ ᐭG OSC OFF: OSC Function is off. Change OSC function on by clicking the button ᐮG PTZ OSC: In use of the PTZ OSC Function. Move a PTZ camera by mouse clicking a point of a video channel. Control Zoom In/Out by mouse clicking [+], [-] buttons ᐯG Playback OSC: In use of the Playback OSC function.
Standalone DVR Manual E-MAP Configuration Video can also be viewed on E-map for a more effective and realistic surveillance.
Standalone DVR Manual Event List/ Real-time Event View Real-time monitoring of events that are occurring is possible by selecting the type of events to see. Pop-up view of the channel is displayed when an event occurs. ᐭ͑ ᐮ͑ ᐭG Select type Event: Select which events to display in real-time event list window.
Standalone DVR Manual Event List/ Search Event View Search for events that occurred by event-type, date, time, and text. Play-back the moment of the event. ᐭ͑ ᐮ͑ ᐯ͑ ᐰ͑ ᐭG Select Type Event: Select which events to search for System: Select which system-related events to search for. G Even if an event type is not selected for being displayed in the real-time event list window, it will still be recorded in the database. ᐮG Date/Time search: Select date or time of the event to search for.
Standalone DVR Manual Record Continuous Recording (On / Off) XT}zWXTX XT}zWXTX ᐓ͑͑ ᐭ͑͑ ᐭG Start Recording: i Click Record button to turn on Continuous Recording for the selected panel ᐓ Recording-ON Indicator will start blinking XT}zWXTX ^T}zWXTX ᐮ͑͑ ᐔ͑͑ ᐮG Stop Recording: Click Record button again to stop Recording-ON Indicator will stop blinking recording Ȅ Continuous recording has the top priority: If continuous recording button is pressed while MD(motion detection) recording is in progr
Standalone DVR Manual MD(Motion Detection) Recording Recording when MD events occur. MD Recording mode is activated after configuring MD Enable/Disable setting and MD area for each device in Configuration Window. G Configuring Motion detection can be available with the menu of “Configuration>Record>Event TIME” G Configuring duration for MD area display is available with the menu of “Configuration>Record>Event Time”.
Standalone DVR Manual Emergency Recording Command Button A Command Button for Emergency Recording ᐭ ͑ OFF͑͑ ᐮ͑͑ ͑ ON͑͑ ᐭG Emergency Recording is off: Click to start Emergency Recording ᐮG Emergency Recording is on: Click to stop Emergency Recording
Standalone DVR Manual Playback For playback of the recorded video, a video channel should be assigned to a video display panel and its panel should be selected with mouse click. And then playback command can be done. G Clicking the playback button on the “Search Tab” without selecting a channel will start All Channel Playback. Playback cannot be done when a channel is not assigned to any panel.
Standalone DVR Manual Playback mode Indicator pn7-IntoVS-1 Playback Mode pn7-IntoVS-1 Live Mode ᐭ͑͑ ᐮ͑͑ ᐯ͑͑ pn7-IntoVS-1 Live Mode ᐭG ᐮG ᐯG ؼG ؼG Run Backup Manager of the current channel Reserved Switch to live surveillance mode Press LIVE button to convert to LIVE mode during playback. When the mouse pointer is on the display area of a Channel, the playback status bar will slide up from the bottom of the display area.
Standalone DVR Manual Search To execute Search ᐭ Select the server to that needs to be Local searched ᐮ Click on LOCAL or REMOTE button in the Playback Control Panel ᐯ Select desired channel number(s) ᐰ Select the date from the calendar ᐱ Select the time by adjusting Time Bar and click on Button. Play Buttons are disabled during the “Remote G Playback”. G Buttons are disabled during the “Local Playback”. To end Remote Search Click on LOCAL button to return to normal search mode.
Standalone DVR Manual Backup To execute Backup Manager, click ‘Backup Manager Command Button’ while in playback mode. ᐭ͑͑ ᐭG Execute ‘Backup Manager’ by clicking Backup Manager Command Button while in playback mode. The available buttons on the floating bar will change automatically when in playback mode.
Standalone DVR Manual Backup Manager ᬅ ᬆ ᬇ ᐰ ᐱ ᐲ ᐳ ᐭG Device Location ᐮG Backup Storage Devices ᐯG Calendar & Preview Area ᐰG Backup Controller Command Area ᐱG Markup backup time block Area ᐲG Select a *backup repository (HDD, USB, CD-RW/ DVD-RW) G If the storages (bank) that the standalone client designated are full, the previous data is overwritten or standalone client stops recording data. Use the backup function in order to store the recorded data in another storage device.
Standalone DVR Manual Backup Procedure ᐭG Select the location of the device that contains the data to back up. In case of remote backup, select a remote server.
Standalone DVR Manual Backup to Storage Device on Computer ᐳ ᐭ Select the location of the device that contains the data to back up. In case of remote backup, select a remote server. ᐮ Backup Storage Device Selection: Click [Select] button for backup devices. All available backup devices are enabled automatically.
Standalone DVR Manual Executing Backup ᐭG Backup button click to Start.
Standalone DVR Manual Procedure to playback backup file ᐮ ᐭ ᐯ ᐰ ᐭ When backup process is finished, the backup data will be stored in a directory named “Data” in the designated storage medium. Also, Backup Viewer program, which is used for viewing the backup data, will be automatically installed. ᐮ Run Backup Viewer program by double-clicking ‘Backup Viewer’ Icon ᐯ When Backup Viewer opens, ‘Open’ dialog box will pop up automatically.
Standalone DVR Manual Backup Viewer Window ᐭ͑ ᐮ͑ ᐯ͑ ᐰ͑ ᐭG Menu Area ᐮG Display Area ᐯG Calendar Panel ᐰG Display and Playback Control Panel
Standalone DVR Manual Main Menu and Display Area ᐯ ᐭ ᐕ ᐮ ᐖ ᐓ ᐔ ᐕ ᐖ ᐭG Menu Area ᐓ Open: Select the directory where the IVA backup files are stored ᐔ Capture: Save the current screen of the selected channel as an image file.
Standalone DVR Manual Playback Control Panel ᬆ ᒋ͑͑ ᐓ͑͑ᐔ͑͑ᐕ͑͑ᐖ͑͑ᐗ͑͑ᐘ͑͑ᐙ͑͑ ᐭ͑͑ ᒌ͑͑ ᬇ ͙͚ͥ͑ ͑ ͑ ͑ ͙͚ͦ͑ ͑ ͑ ͑ ͙͚ͧ͑ ͑ ͑ ͑ ͙͚ͨ͑ ͑ ͑ ͑ ͙͚ͩ͑͑ ͑ ͑ ͙͚ͪ͑ ͑ ͑ ͑ ͑ ͙͚͑͢͡ ͑ ͑ ͑ ͑ ͑ ͑ ͙͚͑͢͢ ᒍ͑͑ ͙͚ͣ͑͢ ͑ ͑ ͑ ͑ ͑ ͑ ͑ ͑ ͙͚ͤ͑͢ ͑ ᐭG Display Control Panel: ᐓ ~ ᐘ 1, 4, 7, 9, 10, 16 channel split mode ᐙ Keep current split mode and switch to next channels ᐮG Calendar Panel: The panel to check the recording days and select days to playback recording data.
Standalone DVR Manual Stop Playback Pause Playback Playback Increase Playback Speed က Move 1 frame backward ခ Move 1 frame forward ဂ Current playback location ဃ Backup Data time bar 139
Standalone DVR Manual Select Channel Window and Capture Window ᐭ ͑ ᐭ ͑ ᒍ ᒌ ᒐ ᒎ͑͑ ᒏ͑͑ ᒑ͑͑ ᒒ͑͑ ᒓ͑͑ ᐭG Select Channel Window Select Folder Select the channels to play back Displays the ID and name of the channel OK: Click to play back the selected channels Cancel: Click to close the window ᐮG Capture Window : A Window to save the current video to an image file Preview area for the screen to be captured Select/De-select whether to use the watermark function Save: Save the selected screen
Standalone DVR Manual Print Window and Watermark Detector Window ᐭ͑͑ ᐮ͑͑ ᐲ͑ ᐳ͑͑ ᐴ͑͑ ᐯ͑͑ ᐰ͑͑ ᐱ͑͑ ᐵ͑͑ Print Window: A Window for printing the Current Screen of the Playback Window ᐭG Channel List: List for selecting the channels to print ᐮG Layout: Select the layout for printing ᐯG Preview: The images can arranged on the selected layout, and a preview of the page is displayed ᐰG Print: Click to print with the selected settings ᐱG Cancel: Click to close window without printing Watermark Detector: Open a
Standalone DVR Manual Open ᐭ͑͑ ᐯ͑͑ ᐮ͑͑ ᐱ͑͑ ᐰ͑͑ [How To Open] Viewing a backup video with the Backup Viewer is briefly explained here ᐭG Click Open button in the Backup Viewer ᐮG Select the directory where the IVA backup files are stored ᐯG Select the channels to view from the channel list ᐰG Select a date with recorded data from the calendar panel ᐱG Split mode change and display control
Standalone DVR Manual Capture Still cut ᐭ ᐮ ᐯ ᐰ͑͑ [How To Capture] After playback of the backup video, capture and save the screen ᐭG Click on a channel to select it. (The name of the selected channel will change to red) ᐮG Click on the Capture menu button ᐯG button.
Standalone DVR Manual Print ᐭ ᐮ ᐯ ᐰ͑͑ [How To Print] ᐭG Click Print button ᐮG Select a layout of the printing ᐯG Drag-and-drop an image from the channel list to the preview area to add.
Standalone DVR Manual Watermark ᐭ ᐮ ᐰ͑͑ ᐯ ᐱ͑͑ [How To Use Watermark] ᐭG Click Watermark menu button ᐮG Click on Open button and open an image ᐯG Click on Detect button to check if the image has been modified ᐰG The result when the image was not modified ᐱG The result when the image was modified 145
Standalone DVR Manual Keywords Glossary in this Chapter Active-X Installation 148 Audio Control 153 Connecting DVR with IE 147 Display Mode 150 PTZ Control 152 Recording Setting 157 Search & Playback 154~155 Streaming Setting 156 Zoom & Resize 151 Minimal Specifications required to operate WebClient Minimal Specifications CPU P4 3.
Standalone DVR Manual 9GD %NKGPV 7UKPI +PVGTPGV 'ZRNQTGT This chapter will discuss about establishing a connection using Web Client and installation of ActiveX. Remote Web Client using Web Browser Enter the IP address or the DDNS server address of DVR on browser. Default DDNS Server Address is “ DDNSSERVICE.COM “ Web Client Login When Login Window pops up, enter the correct ID/PASSWORD.
Standalone DVR Manual ActiveX Installation a) If Warning Message apears, allow the package. Allow “Add On” Click b) Then Select Install Button from Pop Up Window. G Windowss 7 Users Turn UAC Feature off if running under Windows 7 (32 & 64bit).
Standalone DVR Manual 7UKPI 9GD %NKGPV This chapter will demonstrate sets of instruction how to use Web Client. Live By Default, Web Client is connected as Live Mode automatically. Please note that the last selected channel number will be displayed as the first channel number when user switch from one to the other split mode. Beware that camera number one may not always be displayed at channel 1 between each split display mode.
Standalone DVR Manual Split Display Mode User can select sets different channel display mode (1, 4, 8, 9, 7 16) as shown below in the image. G Please note that the last selected channel number will be displayed as the first channel number when user switch from one to the other split mode. Beware that camera number one may not always be displayed at channel 1 between each split display mode. Full Screen Browser Toggle Mode There is no full screen button.
Standalone DVR Manual IE at Full Screen Mode: “F11” Toggle Actual Screen Shot of 32” LCD Monitor. Default Zoom Level at 100% IE at Full Screen Mode: “F11” Toggled. Actual Screen Shot of 32” LCD Monitor. Zoom Level at 200% to fit current resolution at maximum scale. G Note: Not all browsers support scalable zoom level.
Standalone DVR Manual PTZ Control If clicking a left button among a middle button group of the bottom of divided screens, which is denoted by a red-marked rectangular area as follows, the bottom of the screen is changed to GUI screen for PTZ control. For PTZ control, select a desired channel first and then use GUI for PTZ control. GUI for PTZ control is as follows.
Standalone DVR Manual Audio Control A function related to bidirectional audio and a function of sound removal can be operated by using right buttons among a middle button group of the bottom of divided screens, which are denoted by a redmarked rectangular area as follows. x 2 Way Audio Communication On/Off. x Audio Mute On/Off. Remote Screenshot and Recording User can record the video, take a snapshot, print the image, and check DVR Info. The recorded video will be stored in below directory.
Standalone DVR Manual Search Select “SEARCH” from Main Menu Bar in order to switch to Search Mode. Calendar Search x Select date using a Calendar on left panel. Use buttons to change month & year then a day. x Drag “ d ” hour block & “ d ” minute block to desired time as it will arrow display the corresponding hours & minutes on the time table. G Note: On the time bar, Gray Scale Zone meaning there is a recorded data.
Standalone DVR Manual Playback Once time & date has been chosen, press “STOP”, & to “PLAY”, to to “PAUSE” the playback. Setup Select “SETUP” from Main Menu Bar to have access on the Setting of remotely connected HL Series DVR.
Standalone DVR Manual Streaming Setting Setup of streaming being currently connected can be changed.
Standalone DVR Manual Recording Setting User can configure recording setting of HL Series DVR.
Standalone DVR Manual 7. Mobile DVR Viewer Manual Overview for Mobile DVR Viewer Mobile DVR-Viewer™ is the state-of-the-art client software for iPhone, which is capable of monitoring up to 4 channels and controlling pan & tilt, by using iPhone. To use Mobile DVR-Viewer™, installation of Mobile DVRViewer in iPhone is required.
Standalone DVR Manual Installation by using iTunes Install iTunes (from www.apple.
Standalone DVR Manual ᐰG Check the information and purchase the application program ᐱG Download the application program.
Standalone DVR Manual Direct Installation from iPhone (Free Version Or Paid Version*) ᐭG Execute App Store ᐮG Select a search button and type “Mobile DVR viewer” in a search window ᐯG Select Mobile DVR-Viewer ᐰG Check the description and select a price button ᐱG Click an installation button to start installation ᐲG Completion of installation can be confirmed 161
Standalone DVR Manual Uninstallation ᐭG Uncheck the checkbox if uninstallation is to be performed at iPhone ᐮG For complete uninstallation, click a right button and select Uninstall
Standalone DVR Manual Main Screen ᐭG Real-time surveillance videos can be viewed ᐮG Recorded videos can be viewed ᐯG Addition and deletion of a server and a channel can be performed ᐰG Language can be chosen 163
Standalone DVR Manual ADD SERVER ᐭG Select ADD SERVER ᐮG Enter IP address of a server ᐯG Enter a streaming port of the server to be added ᐰG Enter ID of the server to be added ᐱG Enter password of the ID of the server ᐲG Test the validity of the above entered data ᐳG Let the server be added in the list
Standalone DVR Manual SETUP CHANNELS ᐭG Select a desired channel ᐮG Activate a server selecting window by double clicking, and select a server ᐯG SELECTED SERVER displays the position of image to be assigned to a view channel ᐰG Select a channel number to be inserted in a channel.
Standalone DVR Manual DELETE CHANNEL ᐭG Select DELETE CHANNEL ᐮG Select a channel to be deleted ᐯG Press DELETE button to delete the selected channel
Standalone DVR Manual DELETE SERVER LIST ᐭG Select SERVER LIST ᐮG Select a server to be deleted ᐯG Press DELETE button to delete the selected server 167
Standalone DVR Manual Live Screen ᐭG Return to main screen ᐮG Connect to a server ᐯG Show full size image (available in 1-division mode) ᐰG View a screenshot of a live video (available in 1-division mode) ᐱG Move to configuration setting screen ᐲG Video display area ᐳG Buttons for manipulating camera directions (available if a pan-tilt function is supported) ᐴG Buttons for camera zooming (available if a pan-tilt function is supported) ᐵG Buttons for camera focusing (available if a pan-tilt function is sup
Product Warranty Procedure of Playback of Recorded Video ᐭG Select VOD STREAMING form a main screen. ᐮG Select a channel to be replayed. ᐯG Choose the replay date and time. ᐰG Click SELECT button to move to a replay window. ᐱG Select PLAY button to replay the video.
Product Warranty This product has passed thorough quality management and inspection, and the supplier warrants properly according to this warranty. [Warranty Notice] The supplier executes product warranty as below. Place of purchase appointed at our headquarters or technical support team from our headquarters provides service when request of service.
Product Warranty When repair is impossible Breakdown caused by same defect up to 3 times Customer charge Charged product 0repair Customer charge Charged product repair [Charged Product Warranty] T The following cases are handled by charged service even within the warranty period by free of charge.
Standalone DVR Set Manual Thank You
