Instruction manual

57
6.5.8 Logout
Click [Logout] to log out of the system.
7. Wap Connection
The digital video recorder can also be remotely accessed by using a web browser installed on a
mobile phone that support xHTML and MJPEG file format and has screen resolution at
320x240 or above. Then follow this step to access the digital video recorder.
1. Make sure the digital video recorder connects to Internet accurately.
2. Open Internet Browser on mobile phone and fill in IP address of DVR. For example: if the IP
address of DVR is 192.168.1.157 and its web port is 86, you can fill its address column with
http://192.168.1.157:86/wap.html, click button ENTER.
3. There will be a login interface, you should fill in your user name and password, then click
“login”. The user name and password will be blank if password of DVR is disabled, and the
user name and password will be the same as the DVR’s if password of DVR is enabled.
4. After logging on system successfully, there will be a setting page. You can set channel you
want to monitor, picture size and the refresh time. Click “OK” to take them effect.