Instruction manual

32
After the password verification is set up
(marked with “ON”) you can setup seven user
password as well as an administrator password.
If password function is enabled, you have to
input password before logging in.
Note: when password is enabled, you should
login system as admin to manage user. The
administrator’s name can’t be modified.
The default password for Admin is “888888”
and the default password for User1 is
“666666”.
5.2.5 HDD
Click [System settings →System → HDD] to enter [HDD management] menu.
STATE: there are three available statuses: OK, un-format, No Disk. If HDD cannot run
normally（including unformatted and no HDD, there will be the icon displayed on video
live view. If a new HDD is used on the DVR for the first time, the system will restart after the
HDD is formatted.
TOTAL/FREE: indicates total space available and unused space available on the hard drive
disk.
FREE TIME: indicates remaining recording time of the HDD.
OVERWRITE：includes “CLOSE, AUTO, 1 HOUR, 3 HOURS, 1 DAY, 2 DAYS, 7 DAYS, 30
DAYS and 90 DAYS”. If user chooses “CLOSE”, the recording stops when the hard disk drive
is full. It won’t record until “overwrite” is enabled. If user chooses “AUTO”, recording
continues and overwrites previous recording when hard disk drive space is full. If user chooses
“2 DAYS”, the recording record on the hard disk for two days at most. After two days, the
recording will be overwritten. The other options are similar to the “2 DAYS” option.
FORMAT HDD：move the cursor to select your device and press【HDD】to start formatting.
FORMAT USB: this function allows you to directly format the USB device.
5.2.6 Volume
Click [System settings → System → Volume] to enter [volume] menu.
Press [◄] or [►] or drag the cursor to adjust the volume, to previous and move the cursor to
to save.