Instruction manual

27
<Menu CTRL> calls the menu of the high-speed dome after starting. After entering into the
menu of high-speed dome, use [IRIS+] to confirm and use [IRIS-] to cancel. Left click to move
the cursor up or down.
Note: operating functions need to be supported by head end equipment and matched with the
protocol.
[PRESET] Adjust the direction and angle of the camera, and input corresponding presetting
point numbers and then click “ ” button to preset the point number of the menu.
Input the presetting point number, and click “ ” button, to automatically switch the camera to
the corresponding location of presetting point.
Functions of these menu options may vary depending on the make and model of the PTZ
camera you are using. For detailed description of the available options please refer to the
manual of your PTZ camera.
4.3 Channel Status Display
The top right corner of each channel image features the following status icons:
icon indicates that the channel has detected motion in the motion detection mode.
icon indicates that the channel has detected sensor alarm in the alarm mode.
• Red dot indicates that the channel is running in the mode of recording.
5. DVR
5.1 Menu Tree