Instruction manual

22
2. After moving the cursor up or down and selecting the files, left click to enter into playback
interface. It will playback a single channel in full screen.
3. If the [RECORD TIME] section is marked as “ON” under the [VIDEO DISPLAY]section,
it will show the date/time when playing back recorded file.
If it is marked as “OFF,” it will not display the time.
4. During playback, press【►►▌】to play slowly; press【►►】or【◄◄】to fast forward and
rewind; press【▌►】to pause and frame-by-frame play; press【 】to exit from playback and
return to the former menu.
5. When playback files finish it will return to the file list interface.
LOG SEARCH
Move the cursor to 【►】(the icon will be highlighted when selected) and left click to enter into
the [REC. SEARCH] setting interface or press the button [►/║] to enter into the setting
interface, move the cursor to option “LOG” and press the [ENTER] button or left click to
access the Log Search(as shown in the figure below).
Display the system log for the convenience of alarm and operation.
[LOG TYPE]: choose between the following options: [All], [ALARM] and [OPERATION].
[STARTING TIME]: set the starting time of log search.
[END TIME]: set terminal time of log search.
Push “Search” button after the setting of log time and type, and the system will display the
required log in the list. Click [ ], [ ], [ ] and [ ] to switch page and click
[ ] to save the log list to USB disk.
U-DISK backup by time
Move the cursor to 【►】(the icon will be highlighted when selected) and left click to enter into
the [REC. SEARCH] setting interface or press the button [►/║] to enter into the setting
interface, move the cursor to option “U-DISK backup by time” and press the [ENTER] button
or left click to access the U-DISK backup by time Search (as shown in the figure below).