Instruction manual

21
into the setting interface; Or press the [►l l] button to enter into the setting interface.
There are two methods of searching for recordings.
Method 1: playback by date
Date input: adjust the checking date and time and press【Enter】to input the number directly to
adjust the year, month, date. Next, input the time in the next box, click “play” and then choose
playback channel as shown in right fig., then click “play”.
If you choose one channel it will playback that channel in full screen mode. If you choose two
or more channels there will be the same channels to playback simultaneously on four frames.
.
Instruction:
CHN::CH1, CH2, CH3, CH4 and ALL (4 CH); CH1, CH2, CH3, CH4 ,CH5,CH6,CH7,CH8
and ALL(8CH); CH1, CH2, CH3, CH4 , CH5, CH6,CH7, CH8, CH9, CH10, CH11, CH12,
CH13, CH14, CH15, CH16 and ALL (16CH). Press【Enter】and you can change the channel to
be displayed on file listing.
MONTH: it will show all the recordings in this month. Green means normal recording, Red
means alarm recording and Gray means no recording. Click any date in this frame to search the
recording status of that day, and the search results will be showed in the date frame.
DATE: date will show all the recordings and their statuses on this day, you can playback the
recorded files in any period clicking the corresponding period.
Method 2: playback by recording status:
Input the date, click【search】and you can see the recording status on this date
Instruction:
1. 【FILE LIST】: “CHN” shows which channel the file was recorded under, “TIME” shows
the recording time and “SIZE” is the displaying size of this file (unit: MB), red list indicates
this recording file is alarm recording file and black list indicates this file is normal
recording file. Pressing the “SELECT” button will export the selected files to USB storage.