Instruction manual

13
3.3 Remote Control
In device operation, the enter key on the remote control or the front panel has the same function
as a mouse left click. The buttons on the remote control correspond 1-1 with the buttons on the
front panel.
1 Stop ( ■ ): stop playback
2 Play/Pause ( ): opens video search and playback menu. When the playback mode is
activated, press this button to play/pause playback.
3, 4, 5, 11( ): move selected item in menu.
6, Menu (MENU/ESC): displays / exits the main menu.
7 Lock ( ): if the password is enabled, press it to logout the system.
8 Numerical Button: using these buttons, you can choose to output video on your monitor
either as a full-screen view of each of the cameras individually (channels 1 through 9) or you
can combine button “ ” with other buttons to select channels among channel 10 and
Channel 16. For example, when you want to display channel 12 in full screen, you can press
button “ ” and button “2”, then channel 12 will be displayed full screen.
9 Rewind ( ◄◄ ): rewind video during playback.
10 Fast Forward ( ►► ): fast forward video during playback
12 ENTER: this button is used as the “enter” key in most circumstances. On live view press
this button to enter into PTZ mode.
13 Spot View ( ): press to enable auto sequencing,
14 Mute ON/Mute Off ( ): turn on or turn off sound.
15 Quad ( ): press this button to switch display modes. There are 4-CH mode, 6-CH
mode, 8-CH mode, 9-CH mode, 16-CH mode. You can use it according to your demand.
16 REC ( ● ): start or stop manual recording.