Instruction manual

10
2. , , , , buttons
Use arrow buttons to move among the menu items. Press Enter ( ) to confirm your
choice.
On live view the [ ] button is used as PTZ control key.
3. Power LED, Record LED, Net LED
LED lights indicate your connection to the power supply, recording status and net status.
4. These buttons have the following functions:
Menu ( ): access tool bar / hide tool bar / exit menu / exit sub menu.
Rewind ( ◄◄ ): rewind video during playback.
Play/Pause ( ): opens video search and playback menu. When the playback mode
is activated, press this button to play/pause playback.
Stop ( ■ ): stop playback.
Fast Forward ( ►► ): fast forward video during playback.
REC ( ● ): start or stop manual recording.
Lock ( ): if the password is enabled, press it to logout the system.
Quad ( ): press this button switch display modes. There are 4-CH mode, 6-CH mode,
8-CH mode, 9-CH mode, 16-CH mode. You can use it according to your demand.
Mute ON/Mute Off ( ): turn on or turn off sound.
Spot View ( ): press to enable auto sequencing,
Power Off ( ): power Off.
5. IR Window ( ): infra-red sensor for remote control.
6. USB Connector: use these USB ports to backup devices (flash drive, DVD recorder).
7. Number 0~9 buttons/ : using these buttons, you can choose to output video on your
monitor either as a full-screen view of each of the cameras individually (channels 1 through
9) or you can combine button “ ” with other buttons to select channels among channel
10 and channel 16. For example, when you want to display channel 12 in full screen, you
can press button “ ” and button “2”, then channel 12 will be displayed full screen.
NOTE: on live view press the button or or numerical button ten times when
there is no tool bar to switch the main menu between BNC video output and VGA video
output.