User`s manual
Digital Video Recorder art. IPHYB008A-IPHYB016A
1
DVR Rear Panel
16-Channel DVR Rear Panel
Video Input Video Loop Through Factory Reset Switch
HD/SD Out Selector Network Port iSCSI Port
eSATA Port
RS232C Port
RS485 Port
Alarm Input/Output Audio In/Out
Video Out Power Cord Connector
Video Input: Connect the coaxial cables from the video sources to the BNC Video In connectors.
Video Out: An HDMI (High-Definition Multimedia Interface) connector is provided so that you can
use an HDMI monitor as your primary monitor when in the HD (High Definition) display mode. A VGA
connector is provided so that you can use a standard, multi-sync computer monitor as your primary or
secondary monitor. Connect the primary or secondary monitor to the Video Out connector. Connect
the spot monitor to the SPOT connector as needed.
Power Cord Connector: Connect the AC power cord to the DVR and then to a wall outlet.
No special tools are required to install the DVR. Refer to the installation manuals for the other items that
make up part of your system.
DVR Front Panel
16-Channel DVR Front Panel
Camera Buttons LED Jog Dial, Shuttle Ring Enter Button
Arrow Buttons Playback Buttons PTZ Button
Alarm Button
Panic Button
Freeze Button Bookmark Button Zoom Button
Monitor Button Display Button Menu Button USB Port