User manual

7
Chapter 3 Keyboard Setup
3.1 Setup
Please read carefully the description of setting keyboard.
All menu displayed in LED are support joystick control. Turn joystick left equal to push
“ESC”; turn joystick right equal to push “ENTER”; up and down joystick equal to move cursor
forward and backward.
3.2 Enable keyboard
 Power the keyboard without pushing any key and enter the loading screen when
enable.
 If can‟t work normally because of joystick please push “ESC” in order to mask joystick
control menu function.
 In loading screen, push “ MODE” select equipment and push “ PROG” load the
keyboard setup.
3.3 Keyboard Loading
【3 -1 Loading screen of keyboard】
1. Push “ENTER” load the current equipment.
Push “MODE” switch control equipment including MAT (Matrix and Large-size screen
monitors split joint control), PTZ (High speed dome), DVR, DEV (Network video server
management host and digital video platform).
Note: Large-size screen monitors split joint control should work with Matrix so don‟t
need load Matrix first.
Push “PROG” load keyboard setup program menu.
2. User‟s name and password
User‟s name and password of Matrix saved by Matrix and set the relevant equipment
of Matrix before loading.
Load other equipment or keyboard setup, user‟s name and password saved by keyboard.
Keyboard supports 8 users, pleased reference 3.4.2 User management.
2008-08-12 11:25:34
Current Equipment: Matrix
Communication Port: Network
KeyboardＩＰ:010.010.010.080
MatrixＩＰ:010.010.010.050
Key<ENTER>Load equipment；
<MODE>Switch equipment；
<PROG> Keyboard setup；