User manual

6
Chapter 2 Keyboard Installation
2.1 Interface Description
【figure 2 -1 keyboard back panel】
① Port 1：A_B_G，RS-485 port
Port 2：A_B_Y_Z_G，RS422 port
② Network port：10Base-T
③ Power supply：DC12V/1500mA
④ Relay output：NC_COM normally closed，NO_COM normally open
⑤ For extension；
2.2 Installation and Connection
1、 Select communication port. Choose corresponding port for controlling different
devices. E.g. choose network port for controlling intelligent network matrix
switcher, and RS-485 port for controlling speed dome/ PTZ camera.
2、 Thread power cable and control cable through back cover, connect them the correct
place and install side cover.
【figure 2 –2 keyboard installation back view】
3、 User can adjust the position by using brackets.