User manual

37
7.2.1 Interface Instruction
1、 Function key, please refer to keys instruction.
2、 The current control Network Video Server Management Host address, press【SITE】to
amend address, the scope is 1-99.
3、 Window No. of Network Video Server Management Host and Channel No. of Network
Video Server.
4、 It‟s the status of joystick control, press 【MODE】to switch the control type. In P/T
control status, the joystick can control P/T; In mouse control status, the joystick can
control mouse.
5、 Joystick Status Display: X/Y/Z can display joystick right and left, up and down and
also rotation movement. Right and left movement scope is 0-63, rotation scope is 0-7.
6、 Tips Information Display: operation tips and abnormal status display area.
7、 Other Control Parameter Display, including keyboard IP address and Network Video
Server Management Host IP address.
8、 Keyboard Lock Status Marks
7.2.2 Keys Instruction
 F1： Enter system setup interface
 F2： Enter record playback interface
 F3： Previous page
 F4： Next page
 F5： Exist and back to previous menu
 F6： Input switch
 F7： Channels switch. Auto switch, group switch, signal Win switch and all
Win switch are optional.
 F8： Inter-talk open and close in this channel.
 F9： Call upon the function interface (including auto scan, auto cruising,
pattern tour, stop auto, alarm search and dome menu)
【Picture 7-3 Camera Site Control Interface】