User manual

27
6.2.1 Menu Instruction
1、 As to detailed functions of function buttons, please refer to button instruction.
2、 Address of current controlled DVR: press【SITE】 button and input numbers to change
address，address range：1~31.
3、 Indication of current control status，press 【MODE】 button to switch between
“Camera-site Control”and“Control Menu”. In camera-site control mode，move the
joy-stick to perform camera-site PTZ dome motion；in Control Menu mode1，move the
joy-stick to perform the direction selection; up, down, left, right, in the DVR menu。
4、 Joy-stick status display area can display joy-stick direction，and X/Y/Z means the
moving amount of the joystick on left, right direction, up down direction and rotation
separately. Moving range on left, right, up and down direction is 0~63，and rotation is
0~7。
5、 Tips for joy-stick mode。
6、 Display area for other parameters，including current port、control protocol and
operation user.
7、 Keyboard lock status：if the keyboard is not locked，then there will be no mark here.
6.2.2 Button Function
 Function Key F1： To enter DVR system setup interface（The same as the“Main
Menu”button on the front panel of DVR）
 Function Key F2： Start record（The same as “Record”button on the front panel
of DVR）
 Function Key F3： To enter record playback interface （ The same as
“Playback”button on the front panel of DVR）
 Function Key F4： To enter PTZ control（The same as “PTZ Control”button
on the from panel of DVR）
 Function Key F5： Return to the operation menu of the last level（The same as
“Exit”button on the front panel of DVR）
 Function Key F6： Description of Edit Menu（The same as “Edit” button on
the from panel of DVR）
 Function Key F7： Input method switch（The same as “Input Method”button
on the front panel of DVR）
 Function Key F8： Shut down DVR（The same as the power button on the front
panel of DVR）
 Function Key F10： Exit DVR control
 【0】～【9】： Number buttons（The same as the number buttons of“0”～
“9”buttons on the front panel）
 【ENTER】： Confirm（The same as “Confirm”button on the front panel
of DVR）
 【MULTI】： Multi pictures switch（The same as the “Multi Pictures”
button on the front panel of DVR）